Description: Technical Product Bulletin ELECTRICALLY CONDUCTIVE ONE PART LOW COST EPOXY THIS PRODUCT DOES NOT CURE/HARDEN UNLESS HIGH HEAT IS APPLIED.We have some different products not require heating. PRODUCT DESCRIPTION:AA-DUCT AD1 is a single component epoxy, formulated with pure silver powder combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. AA-DUCT AD1 shows slight settling when stored for a long period of time, no caking and will re disperse to a smooth homogeneous state.AA-DUCT AD1 formulation produces electrically conductive paths on a wide variety of surfaces including plastics, rubber, cloth, thermoplastic, paper, wood and many others. AA-DUCT AD1 designed for use in diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry. PRODUCT PROPERTIES: Appearance Silver Cure Type Heat cure Benefits · High strength · Perfect bond · EMI & RFI shielding · Wave guides Substrates · Integrated Circuits · Aluminum · Copper · Magnesium · Steel · Bronze · Nickel · Kovar · Ceramic · Glass · Phenolic · G-10 epoxy glass boards. Catalyst Anhydride Hardness, Shore D 83 UNCURED PROPERTIES: Viscosity @ 25 °C cps 6,800 Density gm/cc 2.35 Silver , % 70-72 CURE SCHEDULE: 0.7 hours @ 200°C, 392°F 1.5 hours @ 180°C, 356°F 2.5 hours @ 160°C, 320°F PHYSICAL CHARACHTERISTICS: Sheet Resistivity: 10-12 mΩ/sq Bulk Resistivity: 3x10-5Ω/cm Adhesion Tensile Strength: 1000 N/cm2 (1500 lb/in2) Lap shear Strength: 1400 N/cm2 (2000 lb/in2) Thermal Conductivity: 0.04J/(cm.s. °C):[0.01cal/(cm.s. °C)] Specific heat: 0.30J/(g. °C) :[0.07 cal/g. °C] Coefficient of Thermal Expansion: 3x10-5 (m/m)/ °C Modulus of elasticity 4x1010 Pa (6x105lb/in2) Poisson’s Ratio: 0.35 GENERAL INFORMATION:This product contains organic solvent. The following precautions should be exercised:Use with adequate ventilation. Avoid prolonged contact with skin, if contact with skin occurs, wash area immediately with a soap and wateravoid prolonged breathing of vapor. Dangerous if swallowed. Refer to MSDS for more details. HOW TO USE:AA-DUCT AD1 conductive silver coated is formulated For application by brushing, spraying, dipping, bandingor stylus. Recommended thinners may be added for individual compositions, to replace solvent losses or to make slight adjustments. Only the recommended thinner should be used. In handling and using organic solvents, the safety precautions recommended by the solvent supplier should be observed. AVAILABILITY: This epoxy can be supplied in many different packages. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Price: 15.99 USD
Location: Warwick, Rhode Island
End Time: 2024-02-29T17:49:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Atom Adhesives
Model: AD1
MPN: AA-DUCT AD1
Country/Region of Manufacture: United States
Benefit 1: High strength Perfect bond
Benefit 2: EMI & RFI shielding Wave guides
Substrates 1: aluminum, copper, magnesium, steel, bronze
Substrates 2: nickel, kovar, ceramic, glass
Substrates 3: phenolic and G-10 epoxy glass boards.
