Description: Connect your SMD 5050 RGB LED strip light to another LED strip, LED dimmer or LED controller. No need to solder. Installation Instructions: 1. Ensure your LED strip is 10mm wide and has 4 copper contacts at the cutting line. 2. Carefully cut your LED strip along the cutting line. Do not tear off the paper on the back of the LED strip before finishing the connection. Just insert the paper and the LED strip together into the connector. This will be easier to insert the LED strip into the connector without bending the LED strip into damage, and the connection will also be more stable. 3. Open the cap of the connector. 4. If you use a non-waterproof LED strip, please insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector; If you use a waterproof LED strip, please first remove the waterproof silicone around the cutting line, then insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector. 5. Close the cap, and check whether the connector works well. 6. Tear off the paper on the back of the LED strip to stick the LED strip, but please reserve the paper that has already been in the connector. Note: Please make sure that the positive poles of your LED strips at both ends of the connector are on the same one channel. Please make sure the arrow marks on your cable, your LED strip and your controller are on the same one channel. Solutions: If the LED strips flicker or do not light up, please follow these steps: 1. Take off the LED strip from the connector. 2. Open all caps on the connector. 3. Use a thin and hard object to simultaneously press hard on both ends of each electrical conductor in the connector, to bring the electrical conductor down to the lowest position. Make sure the electrical conductor can touch the surface of the bottom of the connector without any pressure. In this way, the 4 electrical conductors in the connector can fully touch the 4 copper contacts on the LED strip, ensuring good electrical conductivity. 4. Insert the LED strip into the connector. Package content: 10x connector cable for SMD 5050 RGB LED strip 10x male to male 4-pin plug for RGB LED strip Compatible with: These connectors are suitable for 10mm wide 4 pin SMD 5050 RGB LED strip lights. Not for 8mm wide 4 pin SMD 3528 LED strip lights. Function: Connect your SMD 5050 RGB LED strip light to another LED strip light/ LED dimmer or controller. Easy Installation: No need to solder. Just clasp your prepared LED strip section into the connector to get connected. Flexible and Durable: These connectors are flexible and durable enough for bending or twisting in ANY ANGLES without breaking. Package comes with unique packaging bag printed with trademark.
Price: 15.73 USD
Location: Eugene, Oregon
End Time: 2024-11-19T12:23:32.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Color: RGB LED Connector
EAN: 0737590296819
ISBN: 0737590296819
Package Dimensions LxWxH: 9.33x5.47x0.75 Inches
Weight: 0.11 Pounds
Type: Does not apply
Brand: TronicsPros
