Description: Fits 2019 through 2022 125cc & 150cc Husky and KTM, plus 2021 & 2022 Gas Gas. FMF p/no. 025239 I bought this FMF pipe here on Ebay and then refinished the rusty "raw steel" via Scotchbrite pads & wheels (see 2nd to last picture of the pipe's "before"); re-added the welding heat lines, then coated it with baked-on 900 degree clear caliper paint (the heat gun stuffed in the inlet slightly darkened the headpipe as it baked to permanently set the clear, per paint can instructions). These impressive looking results sure speak for themselves. Compare this to a new pipe that retails for $274.95 - that doesn't have any type of rust prevention. And its a whole lot easier than trying to quickly coat it in WD40 after washing. I also replaced the black 200 degree black Buna o-rings with 600+ degree red silicone o-rings. And included a 2" length of Gates yellow stripe reinforced hose with all-stainless hose clamps to replace the original soft rubber factory hose (which uses springs to seal, eventually allowing the "spooge" to leak out). Use your original mounting hardware and springs-to-the-cylinder. Earlier models used 65mm longs springs but these were later updated to 62.5mm. I recommend, but not included, the FMF Shorty Muffler p/no. 025046 - which is why I went to the stiffer Gates hose, as this silencer has only a single upper mount (see next to last picture.) However, if you're required to use an approved spark arrestor or you're subject to restrictive sound meter checks - call FMF for their recommendation. Yes, this pipe WILL also work with the original factory silencer. Will ship within the lower 48 states inside the USA only.Local Pick up can be scheduled / bring folding green stuff.
Price: 135 USD
Location: Ventura, California
End Time: 2024-09-28T22:30:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Type: Fatty Pipe
Machine Type: Off-road Motorcycle
Color: Clear
Manufacturer Part Number: 025239
Brand: FMF Racing
