14" Bandsaw guide Bracket complete for bandsaws w/ 7/8" post Ridgid 14002 14001

Description: . 14" Bandsaw Support Post Bracket complete with adjusting screws, side guide fork, rub blocks and thrust bearing assembly.Fits all saws with a 7/8" post end Measure your post to be sure. This is for the 7/8" round bottom post.May come unassembled, picture shows it assembledRigid part # 823601 Fits 14000, 14001, and 14002 sawsas well as any other brand with a 7/8" guide post Items 45, 46-(x2), 47-(x2), 51-(x2), 52, 53, 54, 55, and 56, 57, 58 below: GUIDE ADJUSTMENT: To adjust the guide first move both upper and lower guides away from blade so it does not touch them. Then move the lower side guides so that they just touch the blade behind the teeth. Repeat with upper guide. Then adjust the thrust bearings so that they almost touche the rear edge of the blade with no load. I sell many bandsaw parts write me with your needs if you can not find them here or below: Repair Sheet and Parts list in PDF for 14002 emailed 2 you. Item #152789827025 Lower blade guide:Item # 112243893475 Upper blade guide Bracket Item # 112458411734 Blade guide rub block fork Item # 152602074436 Upper Wheel tension Slide only Item #152829588313 Upper Wheel Hinge and Shaft Item # 152708355661 Complete Upper wheel tension assembly Item # 152602070912 Table trunnion support bracket 112458425276 Rub blocks for blade guide Item # 152480378450 Trunnion shoe clamps Item # 112577506256 Table Alignment Taper Pin Item # 152733386309 Ball Bearing Guide Upgrade Item # 112617014304 Door Catch Item #152778061716 Door Catch Stud & Knob Item # 152778067840 Upper Guide Post Complete w/Hardware Item # 152779261500 20% restocking fee on returns All sales ship to address registered with Ebay at the time of the sale.

Price: 159.99 USD

Location: Oxford, Pennsylvania

End Time: 2024-03-08T13:53:39.000Z

Shipping Cost: 8 USD