2 Post Car Lift 9,000 LB Capacity L2900 Auto Truck Hoist 220 Volt

Description: We have more than 20 years experience in Auto Repair produce area. We do price match all the time, that is why we can always offer our customer the best machines with the best price. FREE SHIPPING TO COMMERCIAL ADDRESS WITH UNLOAD CAPACITY.RESIDENTIAL DELIVERY EXTRA CHARGE, Or YOU CAN PICK UP FROM LOCAL Fedex Freight TERMINAL*Buyer must have unload equipment (i.e. forklift) available at delivery location, or you can pick up at local Fedex freight terminal. installation video: https://www.youtube.com/watch?v=SrWsViQW_eY&t=25shttps://www.youtube.com/watch?v=SrWsViQW_eY&t=25s Warranty:12 months warranty on the parts! When you choose us, you will get the BEST warranty on eBay. Most of the sellers don't provide or only provide warranty for those parts for 3 or 6 months, 1 year at most. Please compare with others before you make the decision. Get into our shop and you will see the details of terms and conditions, especially the best warranty! Auto Car Lift L 2900 Features 220V 60HZ 1PH 3HP MOTOR Safety Mechanism:Come with Screw in pads. Free truck adapters. •Double Point Safety Lock Release •Automatic arm lock restraints •Relief valve built in power pump to prevent overloading •Door guards protection rubber •Up-limit switch to protect cylinders working stroke used in safe length scope •Heavy duty 5/16" diameter cable and 4.56" pulley reduce high stress on synchronization process and increase cable life •Stiffened base plate 15/32" thickness •Ultra high molecular self lubricating nylon slider ensures carriage smooth moving up and down •Anchor bolts/mounting hardware included Control System •Lifting operation by pressing "UP" button on motor •Manual lowering operation by pressing lever •Relief valve built in power pump to prevent overloading •1 sets truck adapters included •Lifting Capacity: 9,000 lbs •The overall Height 110-1/4" •The overall Width 133-1/4". Distance between two post 106-5/16" •Column Width 10.59" •Base Width 18.89" •Column Thickness of Steel 11/64" •Carriage Thickness of Steel 3/16" •Arms Thickness of Steel 15/64" •Arm length 29-29/32"～47-1/4" •Min pad height: 3-7/8" •Lift height max: 70 7/8" •Drive-thru width clearance: 99-7/32" •Time to full rise: 20-60 sec•Shipping Weight: 1150 lbs Site SelectionBefore installing your auto lift, check the following:• Lift Location: Always use architect’s plans when available. Check layout dimension against floor plan requirements making sure adequate space is available. Your liftrequires a 220v, single phase, grounded electrical source. There should be room enough to operate the lift in a safe manner and without restrictions.• Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc.• Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete.Floor Requirements• A level floor is suggested for proper installation and level lifting. Small differences in floor slopes may be compensated for by proper shimming. If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab.• New concrete must be adequately cured for at least 30 days.DO NOT install auto lift on any asphalt surface or any surface other than concrete.DO NOT install auto lift on expansion seams or on cracked or defective concrete.DO NOT install auto lift on a second/elevated floor without first consulting building architect.DO NOT install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions.Concrete Specifications:2-post lifts (under 12,000 LB. capacity):6 inches of concrete at 3000 PSI recommended by manufacture.

Price: 2149 USD

Location: McKinney, Texas

End Time: 2024-04-18T08:34:14.000Z

Shipping Cost: 0 USD