2010-2013 Dodge Ram 2500 3500 4WD 2" - 3" High Clearance Fabricated Control Arms

Description: 1/4" Steel High Clearance Fabricated Control Arms for 2-3" Lift Height 2010-2013 Dodge Ram 2500/3500 4WD This is an example of a Mopar OEM replacement control arm. Stryker design engineers saw room for improvement and designed both our Drawn Over Mandrel (DOM) and our NEW Fabricated High Clearance arms as a true Dodge 2500 3500 Heavy Duty upgraded Control Arm. Stryker's DOM Control ArmsOur heavy wall (Drawn Over Mandrel) DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). These arms are precisely the proper length to center your front axle within the wheel well - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! These arms are precisely the proper length to center your front axle within the wheel well! Stryker's HIGH CLEARANCE DOM Control ArmsOur heavy wall (Drawn Over Mandrel) HIGH CLEARANCE DOM sleeves share all of the same features and benefits as our straight arms but with the added benefit of High Clearance Control Arms for less Tire Rub and IMPROVED TURNING RADIUS. They are ALSO application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). These arms are precisely the proper length to center your front axle within the wheel well - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! These arms are precisely the proper length to center your front axle within the wheel well! Fabricated High Clearance Control Arms for less Tire Rub and IMPROVED TURNING RADIUS!These are brand new 1/4" steel construction, CAD designed, and plasma cut fabricated control arms for the front of a Dodge Ram 2500 3500 4x4 with 2-3" lift height. This I-BEAM Fabrication is the epitome of Stryker's commitment to RUGGED STYLE! This is for a set of 4, includes 2 uppers and 2 lowers. If a couple more degrees of turning radius and less Tire Rub captures your attention, you should really consider a HIGH CLEARANCE control arm for your Heavy Duty 2500 or 3500. And Stryker considers our Brand New Fabricated High Clearance Arms a significant offering consistent with our goal of providing you with Rugged Style! If you've installed a leveling kit, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers to re-center your axle properly.Our arms are powder coated black and come with our decals for the lower arms. Again, these are brand new. They come ready to install, with pre-installed zircon fittings, Daystar PTMEG poly bushings, DOM sleeves, etc. Simply re-use your factory hardware. What sets ours apart from other competitors? We use DOM tubing in the collars of the arms AS WELL as the sleeve. Take a look at the sleeve pics. On the left is our Stryker sleeve. On the right is a competitors. We use heavy wall DOM tubing, with NO split seam, for our sleeves. The issue with the competitors sleeves is they are thinner wall and simply rolled over. This leaves a gap/seam. These arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness. These are guaranteed!Benefits: Properly centers front axle within wheel wellStronger than factory stamped steel armsCAD designed and laser cutBeefy 1/4" steel construction w/ DOM collarsDaystar brand PTMEG poly bushingsYear-model-specific DOM sleevesGreasable zerk fittings pre-installedMade in the USA! Description: Our strong 1/4" steel construction fabricated control arms are the perfect upgrade to the factory stamped steel control arms. Including heavy wall DOM sleeves, custom-designed Daystar brand PTMEG poly bushings, and pre-installed zerk fittings, these arms come completely ready to install - Just remove your factory arms and bolt these right in! Our heavy wall DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! These arms are precisely the proper length to center your front axle within the wheel well at 2-3" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! If you've installed a 2-3" leveling kit and your front tires are close to rubbing the fenders near your doors, you need longer arms to properly re-center your axle! Kit Contents: (2) Upper Fabricated Control Arms (2) Lower Fabricated Control Arms Fitment: 2010-2013 Dodge Ram 2500/3500 4WD Technical Notes: Does not fit 2013 Ram 3500 Dually models; Also fits all Mega Cab models; Re-uses factory hardware

Price: 399.95 USD

Location: Maryville, Tennessee

End Time: 2024-11-06T16:25:23.000Z

Shipping Cost: 0 USD