20/24/26x4.0" 48V-72V 3000W-5000W High Power eBike Fat Wheel Rear Conversion Kit

Description: Customized High Power 48V 60V 72V 3000W-5000W 20/24/26x4.0" Fat Rear Wheel Ebike Conversion Kits Attention: The wheel size comes with 20/24/26x4.0" Fat Wheel Motor dropout width: 175mm or 190mm rear hub motor (7-speed Gear) is required. This kit include all you need to convert a bike to an E-bike, except the battery! (We also supply battery, please kindly check our battery category.) Features of the Product: 1. 48V,60V,72V 3000W-5000W Brushless Gearless Rear Hub Motor Wheel with 7-Speed Freewheel, Rated: 48V 3300W- 72V 5000W, Peak: 48V 4800W- 72V 8000W 2. 48V/60V/72V Universal 100A Sine Wave Intelligent Programmable Controller 3. 48V, 60V, 72V Colorful TFT UKC1 Display 4. 4-piston Hydraulic Disc Brake (Brake Levers and Calipers) 5. Twist Throttle 6. Pedelec Assistant Sensor/8 Magnetic PAS Drive 7. Bluetooth module (to change setting via Mobile Phone) Specification: High Quality 48,60,72V 3000-5000W Brushless Gearless Hub Motor Wheel, Rated: 48V 3300W- 72V 5000W, Peak: 48V 4800W- 72V 8000W High Quality Sabvoton 24 MOSFET 100A 3000-5000W Sine Wave Controller, Voltage/Limit Current/Speed and so on can be set through Mobile APP 36V, 48V, 60V, 72V Full color TFT UKC1 Display (with 5-level PAS, speed limit, speed display, Regenerative Function)/TFT UKC1 7-speed Freewheel. Applicable to Fat Wheel E-Bike, E-Motorcycle, E-Tricycle and so on Tile Magnet, low noise and long working life Certificates: CE, EN60335-1:2012+A112014 High Motor Efficiency: >90% Max Torque: >160 N.M. Speed: About 85km/h-95km/h Hub dropout width: 175mm or 190mm rear hub motor (7-speed Gear) is required Controller Advantage: 1.Programmable Sine Wave Controller which support big current and smart match with each motor through self-learning, works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control, give you best pedal experience 2.Motor torque ripple is reduced to minimum through FOC, more smooth and comfortable 3.Universal Input Voltage Range: 48V/60V/72V 4.Work with or without display 5.Parameter setting via Mobile Phone App or Computer 6.All protection make it long life and safe: over/under voltage, over current, over load, over heating, anti-runaway, locked-motor protection 7.Multi functions: Smart match with different motor, 5-speed level for throttle and PAS, Speed limit, reverse, anti-thief, Regenerative Braking, Electric Braking, Keyless start and etc. 8.Best heat sinking with thicker Heat sink Aluminium Plate 9.Anodized Aluminium Controller Case against scratch 10.Mobile phone App can communicate with the controller to modify parameter RisunMotor programmable sine-wave motor controller works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control. Our designed friendly interface of the programmable motor controller makes you set the parameters, conduct the tests and obtain the diagnostic info easily and quickly. 1. FOC-180° sinusoidal drive controller applied to BLDCM or PMSM. 2. It takes only 2-3 minutes for the motor to be well matched on its best electronic angle at the first time. 3. The motor torque ripple will be reduced to the minimum, so as to ensure electric vehicle to run without any noise and vibration, smoothly, and comfortably. 4. The precise current ring can provide accurate torque input to meet the requirement of large torque output during vehicle starting and climbing. 5. The controller enjoys high efficiency due to space vector converter control algorithm which can effectively reduce the temperature rise of controller and extend battery life mileage 6. Built-in various protection: locked-rotor protection, over-current protection, overload protection, over-temperature protection, speed protection, over-voltage protection, under-voltage protection and so on, effectively ensuring the safety of electronic control system and vehicle. 7. System status and fault intelligent management system can effectively monitor the current system operating mode external input state, the case of system failure, and the LED flashes at the same time to facilitate the diagnosis and maintenance. 8. Multi peripheral interfaces: reverse, cruise, anti-theft electronic brake, etc. 9. Parameter modifications and settings are available through Mobile phone via Bluetooth 10. CAN BUS is optional to communicate with body instrument and BMS ABOUT US1. We are specialized in manufacturing electric bike parts, such us Mid motors, Hub Motors, Controller, Lithium batteries, and DIY conversion kits.2. We has a good cooperative relation with BAFANG company. All the items we sell are 100% genuine and authorized.3. With an experienced and professional team, we have exported our products to many countries and regions around the world, especially America and Europe.WARRANTYWe have one year warranty for all quality problem (not include normal wear out parts), within warranty period, we can supply free exchange and repair service. After warranty period, we still can supply exchange or repair service under charge.RETURNSWe offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. The items returned must be in their original conditions.CONTACT USPlease contact us by "Ask a question" to solve your problems before leaving a bad feedback, opening a case or return request. Communication is the best way to solve problems. We try our best to make sure every customer is completely satisfied. Please kindly leave positive feedback if you are satisfied with our items and services.

Price: 658 USD

Location: Shanghai

End Time: 2024-10-27T07:25:31.000Z

Shipping Cost: 0 USD