36 volt E Bike Electric Scooter Throttle with Key 36v

Description: Fast Scooters / Razor Scooter Upgrades This is a super nice upgrade to any 36 volt E Bike or scooter,it is easily wired to any scooter or ebike.. if you want the red or blue you must include and attach a note at checkout or it comes chrome/silver standard! If your not hard wiring this in and you would like certain ends put on the wires in a certain spot to make the install easier,simply email us first and "be VERY specific" on which wires and where in the connector and IF we have that style connector we will set it up ahead,we only carry,2,3,4 and 6 pin module style connectors..no extra charge for this.. Upgrade your throttle on any 36 volt eBike or electric scooter to a much better way to monitor your battery and keep it safe with a key!!. This throttle comes with a convenient 4 LED battery level indicator(dead,25%,50%,75%,100%) and a key switch that can be wired to your controller to prevent others from riding your bicycle or scooter without the key. Also includes with matching left side grip. We have used these on our Cruzin Coolers and they work much better than anything we have found! Installation instructions. Three wires (red=5V coming from controller, black=ground, purple or white=signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before) Two additional bigger wires (yellow and red) are a switched 36V and provide the level for the LEDs.Which would hook up to your on/off switch or whatever you use to turn it off.... IN STOCK! Cable length is 64 inches, comes with 2.8mm male pins installed onto the 5 pins and put inside a 6 pin connector and comes with the matching end and matching female pins. Will plug into any of our kits we sell.

Price: 25.95 USD

Location: Sarasota, Florida

End Time: 2025-01-03T15:05:44.000Z

Shipping Cost: 5.75 USD