3/8" Grade 70 Floor Chain Tie Down Anchor for Truck Trailer, Weld On, WLL 6600Lb

Description: For use with steel framed flatbed trailers with standard hardwood decks.Working load limit-- 6,000 Lbs. / 2,725 Kgs, Confidently hold your loads in place with this solid securement point.Durable, black E-coat finish provides improved resistance to rust and corrosion, providing long-lasting performanceConvenient self-storing anchor point for securing loads, store away under the deck, leaving the surface flush.Must be welded to a trailer cross member and mounts flush with the trailer deck to prevent interference during loading or unloading.Installation The Floor Chain Tie Down should be located near a trailer cross member. First measure 2 3/4" from the web of the trailer cross member to establish the centerline for the hole in the trailer deck. Drill a 1/4" diameter pilot hole from the underside and up through the trailer deck. From the top side, use the 1/4" pilot hole to bore a 2 1/2" diameter hole through the deck. Insert either the Standard or the Heavy-Duty Floor Chain Tie-Down into the hole in the wooden deck from the underside. The top of the Floor Chain Tie-Down should be flush with the top surface of the deck. The bar must be squarely located against the cross member. Weld the bar of the Floor Chain Tie-Down to the cross-member. Weld along both sides of bar. Do not weld chain link; it must be free to move. Note that the minimum weld requirements are 1/4" fillet welds with 1/8" penetration. Finally, clean, prime, and paint the weld and weld area to resist rusting.

Price: 32 USD

Location: Wood Dale, Illinois

End Time: 2024-12-30T04:04:05.000Z

Shipping Cost: 0 USD