3D Printed SR-71 / A-12 Conversion kit - Compatible w GI Joe Cobra Night Raven

Description: Get that old Night Raven shell back into play! All parts are were designed and printed by me. Parts are printed in gloss black pla. Included in this are the following: 2x vertical stabilizers 2x engine intake cones (very pointy and not child safe) 2x engine exhaust nozzle. The shell is not included. You will need to disassemble your shell to install the intakes and exhaust. The fins use the existing tabs. Please read everythingbelow before purchasing. This is compatible with the GI Joe toy from the 1980s, but NOT the newer models. Strong and durable. Tight enough for play, but are easily removed. Parts are printed on-demand, so please allow 3-5 days before the order can be tracked. These models are printed from my own designs. If you need something specific, please send me a message. Because of the printing process, this model may have slight waves or lines in the material and may not be perfectly 'clear'. As shown in the main image, there may also be small individual imperfections, air bubbles, or even thin lines of tiny air bubbles trapped during the printing process. I do my best to ensure you get as good a model as I'm capable of producing using this rapidly advancing(but still new) technology. Respectfully, if you're concerned at all about imperfections, this is not the part for you. Also, since all vintage toys have varying degrees of wear and tear, and that this is considered a 'hand-made' item, I can not guarantee a perfect fit or exact match for each individual application. I do my best to ensure the part is a tight fit on my test vehicle before shipping, but some minor alterations of the part may be required to fit your model.

Price: 18 USD

Location: Redding, California

End Time: 2024-08-14T20:43:24.000Z

Shipping Cost: N/A USD