3pkg HERTZ MPX690.3 + MPX165.3 6.5" COAXIAL SPEAKERS + ML POWER 4 AMPLIFIER NEW

Description: Brand New!MPX690.3 Pro - Hertz 6" x 9" 130W RMS 3-Way Coaxial SpeakersMPX165.3 - Hertz Mille Pro 6.5" 100W RMS 2-Way Coaxial SpeakersML POWER 4 - Hertz 4-Channel 1000W RMS Class D Amplifier Features & Specifications: MPX690.3 ProThe three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening. Features:38 mm pure copper woofer voice coil wound on a Polyamide former for exceptional power handling and dynamic compression-free reproduction.Pressed-pulp cone with cotton fibers material, combining stiffness and lightweight for a wide frequency response.Large rubber surround designed for long throw and optimal sound damping.Over-sized ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.Aerodynamic thus acoustically transparent aluminium alloy basket, eliminates rear wave reflections.Anti-vibration rubber magnet cover, damps spurious vibrations.28mm voice coil Neodymium Tetolon fiber dome tweeter, for undistorted mid-frequency reproduction.20mm voice coil Neodymium Tetolon fiber dome super tweeter, to naturally compensate for drop-off in frequency response due to speaker horizontal installation.Tweeter faceplate with geometry optimized with FEM (Finite Element Modeling) simulations, to provide excellent off-axis frequency response up to 24kHz by perfectly mixing the two tweeters’ emission.Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.Specifications:Power Handling260W Peak130W RMSImpedance: 4-OhmFrequency response: 30 ÷ 24k HzSensitivity: 94dB SPLWoofer size mm (in.): 6 x 9Tweeter size mm (in.): 35 (1.4)Supertweeter size mm (in.): 29 (1.14)Woofer Voice Coil Ø mm (in.): 38 (1.5)Tweeter voice coil Ø mm (in.): 28 (1.1)Woofer magnet: High density flux ferriteTweeter magnet: NeodymiumWoofer cone: Pressed-pulp cone with cotton fibersTweeter dome: TetolonSupertweeter dome: TetolonTop Mount Depth: 3.54" MPX165.3The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.Power Handling: 200W PeakPower Handling: 100W RMSImpedance: 4-OhmFrequency response: Hz 45 ÷ 21,5kSensitivity: 92 dB/SPLWoofer size: 6.5”Tweeter size: 1”Woofer Voice Coil: 1.42”Tweeter voice coil: 0.8”Woofer magnet: High density flux ferriteTweeter magnet: NeodymiumWoofer cone: Pressed-pulp cone with cotton fibersTweeter dome: Tetolon ML POWER 4 Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The Hertz audio car amplifier ML Power 4 (4 x 250 W 2 Ω) is the obvious choice for a top level front-rear Mille system. Features:ADC (ADVANCED D-CLASS TECHNOLOGY) ensures hi-end acoustic response with unmatched power efficiencyThermally optimized double extruded heat sink featuring die-cast aluminium ergonomic terminals250 W x 4 (2Ω) RMS power boasting hi-end quality12 dB/Oct. continuously adjustable (50 to 5k Hz and 80 to 3.3k Hz) active crossover featuring Lo-Pass/Hi-Pass or Full Range settingsSpecific A/B Input switch, eliminates the need for RCA Y-AdaptersML Power IN with balanced Speaker In inputs for an increased noise rejection and RCA InOperating status real time monitoring through 4 LEDsPre-out full range outputs also available with Speaker In inputs;ART™ (Automatic Remote Turn On-Off).Specifications:Channel mode:4 - 3 - 2Output Power (RMS): @ 14.4 VDC4 Ch:150 W x 4 (4Ω)250 W x 4 (2Ω)3 Ch:150 W x 2 (4Ω) + 500 W x 1 (4Ω)250 W x 2 (2Ω) + 500 W x 1 (4Ω)2 Ch: 500 W x 2 (4Ω)Filters:Bypass: YesHi-Pass:A: 50 ÷ 5k @ 12 dB/Oct.B: 80 ÷ 3.3k Hz @ 12 dB/Oct.Lo-Pass:A: 50 ÷ 5k @ 12 dB/Oct.B: 80 ÷ 3.3k Hz @ 12 dB/Oct.Distortion - THD: (100Hz @ 4Ω): 0.08 %S/N Ratio (A weighted @ 1V):100 dBDamping factor (100Hz @ 4Ω):80Approximate Dimensions:Height: 1.84"Width: 6.69"Depth: 11.38" International Shipping: Free shipping DOES NOT APPLY to Puerto Rico, Hawaii, Guam, Alaska or any country outside of the United States.Please message us for shipping quotes. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. Warranty: Each and every product for sale on ebay.com by woofersetc is covered under a (1) One Year Warranty, and can be returned for a period of (1) one year for warranty service. If you have purchased a product from us within the last one (1) year, and it is failing to perform as intended by its manufacturer, please email customer service. You will be issued a Return Authorization Number. Returns will not be accepted without a previously issued RA#. In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product. Protect Your Product With a Consumer Priority Service Warranty

Price: 1449.97 USD

Location: Los Angeles, California

End Time: 2024-02-09T00:34:50.000Z

Shipping Cost: 0 USD