(4) JBL VRX932LA-1 Line Array Speaker and (2) JBL VRX918S 3200W 18 inch Passive

Description: JBL VRX928LA Line Arrays at a Glance:Lightweight and built for smaller venuesGreat power handling and soundFlexible mounting optionsLightweight and built for smaller venuesThe VRX928LA is a lightweight (28 lb.) compact 8" two-way line array speaker system designed for use in arrays of up to six units. VRX928LA is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays such as JBL's VerTec or VRX932LA. The Constant Curvature waveguidemounts two compression drivers on a continuous arc. When additional VRX928LA speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide.Great power handling and soundSince there are two HF drivers in each VRX928LA, the combined power handling and acoustic output of the system is far greater than a single driver could achieve. VRX928LA uses "amplitude shading" to shape the coverage of the array. Switches on the input plate allow, for example, the upper box in an array to reach the distant rear of a room while the lower box is shaded back to reduce excessive level at the front of the listening area.Flexible mounting optionsOne or two VRX928LAs may also be used on a tripod or over the VRX915S subwoofer. The integral rigging hardware is used to securely lock the array together. As many as six VRX928LA speaker systems may be suspended in a single array for a nominal vertical coverage of up to 90 degrees. Suspended applications require the JBL VRX928LA-SMAF array frame (available separately). For applications in which the array must be aimed sharply down, a second Array Frame may be installed to the bottom of the array serving as a pull-back.JBL VRX928LA Line Arrays Features:JBL's exclusive neodymium magnet Differential Drive woofer for high power capacity and lightweight.Two patent-pending neodymium HF compression drivers.Constant Curvature waveguide for unprecedented array coherenceFly combinations of VRX928LA and Subwoofers (VRX915S) with optional array frame (VRX-SMAF)Integral rigging hardware for simple connection of enclosures and optional array frameArrays of up to six enclosures may be flown.Dual angle pole socket for aiming flexibility. One or two speakers may be mounted to a 35 mm pole or tripod stand.Array Configuration Selector permits "array shading" in passive modeFrequency Range (-10dB): 70Hz-20kHzFrequency Response (+/-3dB): 87Hz-19kHzCoverage Pattern: 100 degree x 15 degree nominal (horizontal x vertical), single unitCrossover Modes: Bi-amp / passive, externally switchableCrossover Frequency: 2.0kHzPower Rating: 400 W / 800 W / 1600 WBi-amp LF: 400 W / 800 W / 1600 WBi-amp HF: 130 W / 60 W / 120 WSystem Maximum SPL2: 122dB SPL peak (passive mode)LF: 122dB (bi-amp mode)HF: 128dB (bi-amp mode)System Sensitivity (1w @ 1m): 90dB SPL (passive mode)LF: 90dB (bi-amp mode)HF: 108dB (bi-amp mode)LF Driver: 1 x JBL 2168H 8 in Differential Drive wooferHF Driver: 2 x JBL 2414H 1.0 in neodymium compression driverNominal Impedance: Passive: 8 ohmsBi-amp LF: 8 ohmsBi-amp HF: 16 ohmsEnclosure: 15 mm - 25 mm, multi-ply birch plywoodSuspension/Mounting: Dual 36mm pole socket included. Suspension requires optional VRX-SMAF line array frame kit or M10 eyebolts.Transport: Integrated handle with backing cupFinish: Black DuraFlex finishGrille: Powder coated, black, 18 gauge perforated steel with acoustically transparent black foam backing.Input Connectors: Neutrik Speakon NL-4 (x2)Dimensions: 9.0 in x 16.5 in x 10.5 inNet Weight: 28 lb JBL VRX918S Subwoofer Features:System Type: 18" bass-reflex subwooferFrequency Range (-10dB): 31Hz - 220HzFrequency Response (+/-3dB): 34Hz - 220HzInput Connection Modes: Switchable, +1/-1 or +2/-2Power Rating (Continuous1 / Program / Peak): 800 W / 1600 W / 3200 WMaximum SPL2: 130dB SPL peakSensitivity (1w @ 1m): 95dB SPLLF Driver: 1 x JBL 2268H 457 mm (18 in) Differential Drive wooferNominal Impedance: 8 ohmsActive Tunings: dbx DriveRack, all models. Settings available at www.jblpro.comMounting: Top mounted M20 threaded socket for optional SS4-BK poleSuspension / Mounting: Optional VRX-AF line array frame kit or M-10 eyebolt kitEnclosure: Rectangular, 18 mm, 13-ply birch plywoodFinish: Black DuraFlex finishGrille: Powder coated, black, 16-gauge perforated steel withacoustical transparent charcoal foam backing.Input Connectors: Neutrik Speakon NL-4 (x2)Dimensions (H x W x D): 20.0 in x 23.5 in x 29.5 inNet Weight: 81 lb

Price: 6000 USD

Location: New York, New York

End Time: 2024-11-05T13:38:42.000Z

Shipping Cost: N/A USD