4G+ 5G LTE 2X2 MIMO Router Booster Antenna 700-6000MHz for T‐Mobile Verizon AT&T

Description: Maswell 5G Antenna Outdoor 2X2 MIMO | Up to 7.5dBi Cellular 600-8000MHz Omni Cross Polarized 4G LTE UWB 5G NR External Aerial with WiFi 6E for Caravan Home Rugged Router Modem | 2X SMA-Male & TS9 Ultra-Wideband: The Maswell 5G Antenna is a 5G/4G MIMO cross-polarized omnidirectional dipole antenna with up to 7.5 dBi gain. It has an ultra-wide bandwidth of 600-8000 MHz, covering all 4G, LTE, 4G+, 5G NR and 5G cellular frequency bands around the world. The 2X2 MIMO design provides optimal throughput and quality improvements for improved signal stability, suitable for indoor, outdoor and RV camping, especially in urban areas. And equipped with 2.2m LMR195 equivalent low-loss cable and SMA connector and TS9 adapter. Note: 1. After connecting the antenna, please turn on the external antenna mode of your router and restart the router. 2. The antenna is IP67 waterproof, but the interface between the antenna and the router is not waterproof due to physical structure limitations. Therefore, when used outdoors, waterproof tape must be used at the interface. Wide range of applications: Maswell 4G 5G Antenna strikes a good balance between radiation omnidirectionality and performance, and is compatible with cellular networks, Bluetooth, WiMAX, Zigbee, WiFi 6E and WiFi 7 technologies. It is very suitable for various network equipment for RV camping, urban and rural 5G, coverage enhancement systems, and industrial and commercial purposes. Compatible with all routers, modems, CPE, WAP, smart meters, in-vehicle network equipment, smart agriculture, IoT and M2M devices. Easy installation indoors and outdoors: Maswell LTE Antenna allows for a variety of installation options, including wall and pole mounting. The impact-resistant radome is made of ASA for excellent mechanical properties, is IP67 rated and is UV stable. The operating temperature range is -40°C to +80°C, with excellent high and low temperature resistance. Regarding coaxial cable: Please use LMR195 equivalent cable as extension cable or better, the total length should not exceed 5 meters. Depending on your specific needs, equivalent LMR-200 extension cables and connectors may be recommended. Various antennas have different installation requirements, but all antennas must be installed scientifically. It is essential to find the best position through surveying. Designed by UK Chartered Engineer: 5G-ready antenna for UK 4G/5G LTE-A Broadband Using stronger ASA material than ABS, UV protection, better against corrosion, deformation. Therefore longer life. It is a high-gain antenna that can add bars in weak signal areas. Project Supervised by Chartered Engineer Maswell outdoor omnidirectional panel antennas are a long-term solution for improving cellular data performance in low-signal areas. RV camping, residential and commercial buildings often suffer from poor coverage or "dead spots." These can be caused by distance from cell towers or obstructions such as trees, hills, and other buildings that block your view. 600MHz-8000MHz Ultra-Wideband MIMO Panel Antenna with Two Leads for Cellular 5G 4G and WiFi 6 Applications Up to 7.5 gain for added signal bars. High gain usually means directional antennas, which are difficult to install. Our antenna is a patented omnidirectional high-gain antenna, suitable for novices and therefore suitable for everyone. MIMO antennas mean multiple inputs and multiple outputs, which greatly enhances data throughput and stability. The antennas will not interfere with each other, allowing the router to play its best role. Application Cellular network frequency bands: Supports all global frequency bands - UWB, 5G, 5G NR, 4G+, LTE-A, 4G, 3G, etc. WiFi Band: Supports all WiFi and IoT frequency bands - WiFi7, WiFi 6E, WiFi 6, Wimax, Bluetooth, Zigbee, IoT, etc. No matter what protocol you use, this antenna is suitable for your wireless application Installation is simple, but please note the following tips After connecting the antenna, enable the router’s external antenna mode Find a location with the best signal, at least 3 feet away from the antenna when testing. Do not extend the coaxial cable more than 5 meters. It is recommended to use LMR195 equivalent cable with 50 ohm impedance. Do not use a Y-cable to connect 2 antenna leads to 1 modem port. If the interface is outdoors, roll up waterproof tape. Highlights MIMO Design Improved signal quality and data throughput LMR195 equivalent cable is better than RG174 Omnidirectional antenna is more stable and easier to use Maximize signal quality (SINR, RSRQ) and signal strength (RSSI, RSRP, bars) Suitable for 2x2 routers. NOTE: A 4x4 router requires two 2x2 antennas.

Price: 125.99 USD

Location: Suzhou, Jiangsu

End Time: 2025-01-11T01:37:25.000Z

Shipping Cost: 0 USD