8bits4ever SX-2 FPGA MSX Computer Emulator

Description: The SX-2 is a OneChipMSX clone, able to emulate all MSX computers (MSX, MSX2, MSX2+, MSX Turbo), comes in a 14x17cm 3D printed case. Unit is in mint condition, only used a couple of times. Works and looks like new. Included in the bundle are: - SX-2 unit- 8Gb SD card (FAT-16 formatted and with MSX-DOS installed)- VGA to HDMI adapter- USB to Micro-USB cable for charging- Instruction manual More information: Hardware: * 2nd gen Altera Cyclone II EP4CE22F17 (22K cells) FPGA chip* 32 MB SDRAM Features: * firmware: OCM-PLD v3.9.1 (or higher) by KdL* MSX2+ compatible (plus some experimental Turbo-R features like PCM out)* MSX++ compatible * PSG* SCC+* OPLL/YM-2413 (FM-PAC without the SRAM)* OPL (YM3526), OPL2 (YM3812) and OPL3 (YMF262) (not OPL4, so not MoonBlaster-compatible)* Selectable 2 or 4 MiB RAM mapper* Turbo mode (4.10 up to 8.06MHz) incl. Pana-compatible 5.37MHz (speeds are approximations)* Cartridge slots can be configured as internal MegaSCC+/MegaRAM up to 4MiB* Internal ESP-01 WiFi module (Requires SD-BIOS)* MIDI out via joystick port using MIDRY software (works on any MSX; cable not included)* 16 VRAM pages of 64KiB (1MiB total)* C-BIOS support* Optional second EP-BIOS (requires reflashing firmware) Ports/Connectors: * Dual 5V (2A/10W) power connector (DC barrel center positive - not included)* 3.5mm TRS Stereo Audio connector* 3.5mm TRS tape input/output connector* 15/31kHz VGA output (supports ZemmixNeo VGA-to-SCART cable) with switchable scanline generator* PS/2 keyboard ISO105 or JP106 recommended* Mapping support for International/English, Italian, Brazillian, French and Spanish* Two standard DE9 MSX joystick connectors* PS/2 mouse port (emulates MSX mouse on joystick port 1)* Two cartridge slots* Optional I/O-only cartridge slot via IDC connector (requires additional module from 8bits4ever)* MicroSD card slot

Price: 230 USD

Location: Pleasant Hill, California

End Time: 2024-10-28T03:26:12.000Z

Shipping Cost: 0 USD