A Used/Refinished Knight One-Shot Milled Face Blade Style Putter w/Pistol Grip!

Description: A "Used," Refinished. Knight OSP-23, Milled Face, One Shot, Blade Style Putter with a Graphite Shaft and Pistol Grip! When I researched this Putter, I looked on eBay first, and found that there are a lot of different OSP putter Styles/Shapes. Some of them are milled face, and some not! As a retired Machinist I can tell you how the Milled Face is produced. A Tool called a Fly-Cutter is used! It has a Lathe bit tightened into a round base, and is adjustable for the area of cut. The Milling Machine motor is turned on to a medium RPM, and the cutter is fed across the face of the Putter a little bit faster than the feed rate will cut a smooth finish, leaving a series of raised steps. The raised steps will grip the ball better at MOI, thus allowing the ball to keep on a straight path when rolling. For this Putter, I sanded it down to bare metal to remove all the nicks and dings, with the exception of the face. On the face I ran a carbide tool thru each step to remove any old dirt, and some of, but not all of, the nicks and dings that I could. I masked and repainted the Putter Head with 4 coats of flat black primer, then gave it four coats of flat black paint, followed by 4 coats of Matte Clear Finish. The paint was not oven baked, so I don't know how long it will hold up, but if nothing else, if an old gym sock is used for a head cover, it should make it last longer than without, The Shaft is a Sensus Super Sensitive, High Strain Graphite and is in very good condition. The Grip is a Percise (not mispelled) Pistol Grip and is in good condition! Putter will be protectively packaged and shipped USPS Ground Advantage!

Price: 16 USD

Location: Albuquerque, New Mexico

End Time: 2025-01-28T23:46:30.000Z

Shipping Cost: 0 USD