AC Jewelry Welding Machine Gold Silver Sparking Spot Welder High Power 80A 800W

Description: Use range: All precious metal, precious metal alloy materials, such as gold, silver, platinum, palladium, stainless steel, titanium, all of which are weak arc welding metals can be welded. Adjustable pulse spot welding machine (JD welding machine) Power supply: AC110V Power: 800W Welding current: 0.5-80A continuously adjustable (pulse ignition)AC Jewelry Welding Machine Gold Silver Sparking Spot Welder High Power 80A 800WAdjustable pulse spot welding machine (JD welding machine) SpecificationPower supply: AC110VPower: 800WWelding current: 0.5-80A continuously adjustable (pulse ignition) Welding range: 0.2-1.3mm Use rangeIt can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings , Skilled can also weld small parts inside dental steel wire thermocouple clock, etc. Instructions1. Before using the welder, first check if the power supply meets the operating voltage.2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece.4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.PrecautionsIf the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded. Please pay attention to safety when using.Standard accessoriesOne hostpower cableFoot switchWorkpiece clipTungsten needleTorch needle holderInstruction manual PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.* Feature *Creative Design，Durable Material，Beautiful AppearanceFeature 1Easy installation,Convenient Use,Easy OperationNote:Do not send to Brazilshipping noticeCan not ship to Puerto Rico,Alaska/HawaiiItem location:CA /NJ /AustellTransportation does not include:canariasshipping notice：Can not ship to Puerto Rico,Alaska/HawaiiBrandUnbrandedMPNDoes Not ApplyPower supplyAC110VPower800WWelding current0.5-80A continuously adjustable (pulse ignition)Welding range0.2-1.3mmWelder TypeElectric Spot WelderOn Oct 11, 2024 at 03:24:12 PDT, seller added the following information:

Price: 165.66 USD

Location: Monroe Township, New Jersey

End Time: 2024-12-11T07:18:19.000Z

Shipping Cost: 0 USD