Adafruit Feather nRF52840 Sense [ID: 4516] (M4F, IMU, PDM mic, BMP280, LSM6DS)

Description: Adafruit Feather nRF52840 Sense (Product ID: 4516) https://www.adafruit.com/product/4516 Bought many of these for a project, but ended up replacing this board with a custom solution using different sensors. If you're looking to place a bulk order, I have ~200 more of them in different packaging (pink anti-static bubble wrap), which I purchased directly from Adafruit. Feel free to message me if you need more of them. Here's a copy of the description from Adafruit. Note that the board I'm selling uses the LSM6DS33 (an excellent and quite sensitive 6 DOF accelerometer and gyro), which was recently replaced with the LSM6DS3TR-C on this SKU. --- The Adafruit Feather Bluefruit Sense takes our popular Feather nRF52840 Express and adds a smorgasbord of sensors to make a great wireless sensor platform. This Feather microcontroller comes with Bluetooth Low Energy and native USB support featuring the nRF52840! This Feather is an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB plus battery charging. With native USB it works great with CircuitPython, too.Like the Feather nRF52840, this chip comes with Arduino IDE support - you can program the nRF52840 chip directly to take full advantage of the Cortex-M4 processor, and then calling into the Nordic SoftDevice radio stack when you need to communicate over BLE. Since the underlying API and peripherals are the same for the '832 and '840, you can supercharge your older nRF52832 projects with the same exact code, with a single recompile!This Feather is also a BLE-friendly CircuitPython board! CircuitPython works best with disk drive access, and this is the only BLE-plus-USB-native chip that has the memory to handle running a little Python interpreter. The massive RAM and speedy Cortex M4F chip make this a good match. Make centrals or peripherals with the ease of CircuitPython.A chorus of supporting sensors surround the module so you can do all sorts of environmental and motion sensing:ST Micro series 9-DoF motion - LSM6DS3TR-C Accel/Gyro + LIS3MDL magnetometerAPDS9960 Proximity, Light, Color, and Gesture SensorPDM Microphone sound sensorSHT HumidityBMP280 temperature and barometric pressure/altitudeFeatures:ARM Cortex M4F (with HW floating point acceleration) running at 64MHz1MB flash and 256KB SRAMNative Open Source USB stack - pre-programmed with UF2 bootloaderBluetooth Low Energy compatible 2.4GHz radio (Details available in the nRF52840 product specification)FCC / IC / TELEC certified moduleUp to +8dBm output power21 GPIO, 6 x 12-bit ADC pins, up to 12 PWM outputs (3 PWM modules with 4 outputs each)Hardware SPI, UART, I2C and I2S on any pinsPin #13 red LED for general purpose blinking, Blue LED for general purpose connection status, NeoPixel for colorful feedbackPower/enable pinMeasures 2.0" x 0.9" x 0.28" (51mm x 23mm x 7.2mm) without headers soldered inLight as a (large?) feather - 6 grams4 mounting holesReset buttonSWD debug pads on bottom of PCBWorks out of the box with all of our Adafruit FeatherWings! (Even the UART-using ones like the GPS FeatherWing)

Price: 30 USD

Location: Chicago, Illinois

End Time: 2024-08-22T05:45:36.000Z

Shipping Cost: N/A USD

Product Images

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Adafruit

Type: Sensor Development Board

RAM Size: 1MB

Features: 3D Accelerometer, 3D Gyroscope, 3D Magnetometer, Audio Interface, Bluetooth Connectivity, Flash Memory, Humidity Sensor, LED, Pressure Sensor, Temperature Sensor, USB

Country/Region of Manufacture: United States

Core: ARM