ADE RD3-006B GREEN Dot+Optic Mount Plate For 1911 Novak Rear Sight Pistol red

Description: Comes with an ADE RD3-006 GREEN dot sight, a picatinny plate(pre-assembled), and a optic mounting plate designed to fit 1911 pistols with standard Novak(does NOT fit Novak OVERSIZE) rear sight cut by replacing the factory rear sight on standard NOVAK dovetail.1911s have several different rear sight dovetail cuts, such as Colt(G.I.) Standard, LPA, Novak standard/traditional and Novak Oversize rear sight. This ADE Optic Plate made by ADE is for Novak Standard/traditional rear sight ONLY. It does NOT fit any 1911 that does NOT has a traditional Novak rear sight. Please confirm with your pistol manufacturer what rear sight you have before purchasing.Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s. While it is possible to install this mount without the use of a gunsmith, we recommend hiring a qualified gunsmith. Please note. Unprofessional installation will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.One of the advantage of this ADE plate over others is this optic plate has a CURVED/CONCAVED design that will sit flush(wrap the top curved pistol slide) on the top of the pistol. Many other plates are Flat design. This optic plate for Novak Does NOT fit any Novak cut that is NOT GENUINE/traditional/true Novak rear sight cut, such as some Taurus 1911 and some Ruger 1911 who use Licensed Novak rear sight but created their own sizes cut.The optic plate for 1911 with Standard Novak rear sight requires removal the rear sight and disassemble the pistol. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque(12in/lb) will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.This ADE RD3-006 GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates4 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1WThe green dot comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim. Full metal construction with glass lens. No plastic body, no plastic lens.Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.Fully shockproof and fogproof. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture Fully windage and elevation adjustable and lockable 3 MOA5 Illumination Settings. Powered by a lithium CR2032 battery(Included) Magnification: 1X Sight Window: 25mm x 16mm; .98" x .62" Elevation Adustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m) Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m) Set Value for One Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turn Subtension of the Aiming Dot: 4 MOA (10.5 cm @ 100 m) Parallax-Free Sighting Distance: approx. 50 yds Recoil Resistance: At least 1000 Gs Operating Temperature Range: -10°F to +130°F (-25°C to +55°C) Storage Temperature Range: -40°F to +160°F (-40°C to +70°C) Power Supply: 3V with one CR 2032 Lithium battery Dimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm) Weight (in operating condition without mounting materials): 0.9 oz (25 g). Included: Allen wrench to tighten fasteners Screwdriver Adjusting disc Protective cap 3V Lithium battery (CR 2032) Operating instructions Weaver/Picatinny-style mountMounting plate for SIG SAUER P320Extra rubber sealing ring for battery compartment Ade Advanced Optics 1 Year USA warranty Payments are accepted through Paypal. We ship through USPS First Class Mail from Oregon, west part of the country should receive in 1-3 days,middle part and east part of the country should receive in 3-6 days!NO INTERNATIONAL SHIPPING! We promise our best quality and the lowest price for our customers, if the item is not as the description in the listing page, we will issue a exchange or full refund. if the item is the same as the description, we willl charge a 15% restocking fee. We are a new seller on Ebay, all our prices are really low compare to others, because we want to earn feedbacks. Please understand our feedback will be left once after we have received feedback from buyer. Our goal is to place a profit margin of $1 ~ $3 per item and sell in volume. As such, the more you save the more we make. While the others are selling 1 item, we are selling 10 ~ 20 items due to our price reduction. Please use the "Ask Seller A Question" button. Please allow up to 24 hours for a response. Usually the buyer will get response in 6 hours. Customer Satisfaction • Please contact us right away (via eBay Messages) if you have any concerns, questions or issues about your purchase – and before you leave feedback. • If you give us the chance, we will make every effort to make it right for you! • We strive for five stars from you in feedback – and work hard to earn it. • Customer satisfaction is very important to us and our goal is to have every customer want to be a repeat customer.

Price: 86.85 USD

Location: Oregon City, Oregon

End Time: 2024-07-25T18:55:07.000Z

Shipping Cost: 0 USD