AITIAO CNC Shield Expansion Board V3.0 + 4Pcs DRV8825 Stepper Motor Driver Mo...

Description: Brand New AITIAO CNC Shield Expansion Board V3.0 + 4Pcs DRV8825 Stepper Motor Driver Module with Heat Sink for Engraver 3D Printer Ramps 1.4 StepStick Manufacturer model: 00852-4PCS DRV8825 Stepper Motor Driver: Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-stepFeatures an adjustable current limit, overcurrent and overtemperature protection, Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)CNC Shield Expansion Board: The expansion board can be used as engraving machine, 3D printer and other drive expansion board.It is a total of four slots, can drive four stepper motor. Each road stepper motors only need two IO ports.PWM spindle and direction pins, support 4-axis (X, Y, Z, A - you can copy X, Y, Z or use the pin of D12 and D13 to custom firmware to perform the complete axis 4)Package and Warranty: You will receive 1pcs CNC shield V3.0 Engraving Machine Expansion Board + 4pcs DRV8825 Stepper Motor Driver + 4pcs Heatsink.If you have any problem with the product, please contact us Description DRV8825 Stepper Motor Driver Module: 1.Simple step and direction control interface 2.Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 3. Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor rated voltage to achieve higher step rates 4.45 V maximum supply voltage 5.Built-in regulator (no external logic voltage supply needed) 6.Can interface directly with 3.3 V and 5 V systems 7.Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout 8.Short-to-ground and shorted-load protection 9.4-layer, 2 oz copper PCB for improved heat dissipation 10.Exposed solderable ground pad below the driver IC on the bottom of the PCB 11.Module size, pinout, and interface match those of A4988 stepper motor driver carriers in most respects,can be used as a higher-performance drop-in replacement CNC Shield Expansion Board: 1. Version: Latest CNC Shield Version 3.0V 2. Size: 68 x 53 x 18mm / 2.67 x 2.08 x 0.7" 3. Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply) 4. The V3.0 expansion board can be used as a drive expansion board for engraving machines, 3D printers, etc. There are a total of 4 slots for stepper motor drive modules, which can drive 4 stepper motors, and each stepper motor only needs 2 IO ports, that is to say, 6 IO ports can manage 3 steppers The motor is more convenient to use. 5. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) Package Included: 1 x CNC Shield V3.0 Expansion Board 4 x DRV8825 Stepper Motor Driver 4 x Heatsink Shipping and Handling Please allow 5-7 business days for the package to arrive, regardless of buyer location within the US. We will provide an online tracking number to you once the item has been shipped. It may take a few business days for our automated system to process the tracking number onto eBay. However, this will not affect the shipping times. Return Policy All our products are brand new and sealed. All items qualify for returns within 30 days of receipt. Feedback We take our reputation seriously. If you have any questions or concerns, please contact us and we will respond back to your message within 24 hours.

Price: 44.41 USD

Location: Within United States

End Time: 2025-01-14T19:21:44.000Z

Shipping Cost: 0 USD