Alpinestars Supertech M8 Factory MIPS Helmet Medium Black/Yellow/Blue

Description: Click Here to Contact Us Supertech M8 Factory MIPS Helmet Shell construction utilizes a highly advanced molding technology with a multi-composite combination: uni-directional carbon composite with aramid layer that gives significant radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and providing critical penetration protection This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner The Supertech M8 liner construction combines with the shell to offer highly efficient impact energy management Formed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit Four section liner construction allows for specific densities of polymer to be prepared for different zones around the helmet lining improving energy performance, comfort and fit A-Head fitting height and angle adjustment system Incorporates a system to allow the helmet to be tuned exactly to the rider’s preference for the height and angle at which the helmet sits on the head allowing for ultra-specific set-up that can be adapted for the type of riding and the rider’s preference Raise and lower helmet fit and tilt with micro-adjustable pad Visor release system ensuring the mounting is held securely in place for riding over extreme terrain and any track conditions Visor release system provides the right level of resistance to ensure the visor detaches from the helmet shell if it is subjected to a significant impact regardless of angle The Supertech M8 visor release mechanism is conceived to avoid the inherent weaknesses in other types of anchoring systems Maintaining shell integrity is vital for safety and with the possibility of multi-directional forces impacting on the visor, separation at the critical point of leading reduces potentially damaging leverage and rotational accelerations that refer injury to the rider’s neck and spine The base of the Supertech M8 helmet has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (clavicle) Energy absorption pad incorporated into the area of the base pad where it sits over the rider’s collarbone Energy absorption pad consists of a more flexible compound rubber section which allows deflection when it contacts the clavicle Polypropylene chinbar allows for a degree of lateral deflection, further improving impact protection for the collarbones Multi-Directional Impact Protection System (MIPS®) incorporated to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain A low friction ‘slip’ layer is incorporated into the Supertech M8 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell. When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussion Emergency Release System (ERS) While the helmet is still on the rider’s head, the side cheek padding can be extracted efficiently and safely to allow ease of removal by trackside support and medical staff The Supertech M8 is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell Along with the ERS padding removal, ‘Eject’ allows for emergency removal of the helmet, without putting load on the rider’s spine Chin-strap: Wider than certification requirement: 26 mm for comfort and produced with a woven poly yarn to give a soft ‘hand’ feel that connects securely with a double D-ring The material selection, preparation and construction of the helmet has been rigorously analyzed for weight to strength and energy absorption properties and a strict analysis of all the components used in the Supertech M8 finishing Heat mapping tests have resulted in specifically designed ducting which produces a positive flow into the helmet over and around the rider’s head, improving comfort while riding and reducing the on-set of heat stress in extreme conditions Visor design profiled to direct airflow, acting as a channel to concentrate and smooth the flow into the shell Liner formed to optimize airflow channeling around the rider’s head before being extracted through rear exhaust vents to ensure positive pressure is maintained with constant airflow while riding Lining design includes canals which allow a tube to be incorporated on either side of the shell allowing for hydration system compatibility Removable liner cover is washable and features a cool-max fabric interior and anti-bacterial talent yarn for long-lasting freshness and quick-dry performance between riding sessions Features TPE coating washable surfaces to improve maintenance and increase durability Includes soft bag Please Note All Helmets Ship with a CLEAR VISOR! (where applicable) About Us: Wicked Racing is dedicated to bringing the best go-fast parts, gear and accessories to riders and their motorcycles. We are dedicated to the performance motorcycle industry and helping you make your motorcycle the best machine on track or street and you the most protected and comfortable rider possible. We use our decades of riding experience on both the street and race track, racing, touring and coaching to select the best products available. We pride ourselves on being a company built on providing fellow riders with the best products and advice for their specific needs. Contact Us: We are always glad to answer any questions about the products we sell and provide advice to our fellow riders. We are open 10AM-6PM EST (GMT -5) Monday through Friday or contact us by using eBay Messaging. If you're in Central Pennsylvania stop in at our Altoona retail location and say "Hi!" Shipping: We generelly ship domestic orders via US Postal and UPS. Items specific shipping information is included in the item description above and in the auction details (we reserve the rigth to switch carriers at our sole discression). All items are shipped with tracking which we will provide to you via eBay as soon as the item ships. Please note that some orders may ship individual items from multiple locations. International Customers: Items shipped using eBay's Global Shipping Program typically include customs fees/import taxes in the shipping cost provided to you by eBay. Items shipped by us DO NOT include import duties or taxes. These charges are the buyer's responsibility and vary by country/location. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. These charges are not to be confused for additional shipping charges. eBay’s international delivery estimates are typically unrealistic. International shipments are subject to many factors which often cause delays. If you must have an item by a specific date please contact us prior to purchase. Post Sale Issues and Returns: If you have an issue with an order PLEASE CONTACT US FIRST by eBay MessagingWe will do everything possible to make sure you are satisfied with your purchase. Opening a case or leaving negative feedback will NOT help resolve an issue. If you need to return an item please contact us first to get an RMA. Items returned without an RMA will be refused. All returns are subject to the following conditions: You may return items for a refund or an exchange so long as it is in as-new condition with all tags and packaging in place (in the case of helmets including an unremoved sticker on the visor). We DO NOT accept returns/exchanges for used, installed or worn items, items with damaged packaging, removed tags and missing instructions, etc. for any reason. USED HELMETS CANNOT BE RETURNED FOR LIABILITY REASONS. Please make sure to get an RMA# from us which will be valid for 14 days. Items not received within 14 days will be refused. Returns must include all tags, packaging and be shipped in a sturdy shipping box. DO NOT use the manufacturer box as the shipping box. Items received that do not meet these criteria will not be accepted and will be sent back to you at your cost. Unless the error is on our part the customer pays return shipping. Once we receive the item(s) and make sure they adhere to the conditions above we will refund your purchase price less a 15% restocking fee. Original shipping is not refundable. For items where the item is shipped "free" actual shipping costs incurred by us will be deducted in addition to the restocking fee.

Price: 529.95 USD

Location: Ashville, Pennsylvania

End Time: 2025-01-19T23:21:57.000Z

Shipping Cost: 0 USD