Auger Post Hole Gas Powered Earth Auger Digger Fence Ground Drill Set 52CC/71CC

Description: Auger Post Hole Gas Powered Earth Auger Digger Fence Ground Drill Set 52CC/71CC Auger Post Hole Gas Powered Earth Auger Digger Fence Ground Drill Set 52CC/71CC Note:Our product list includes only machines, only drills and complete machines. Please purchase according to your actual needs. If you have any questions, please ask our customer service. Type1:71 cc Engine The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical Details: Engine: Single Cylinder, 2-stroke, air-cooled Cylinder capacity : 71cc Fuel mix: 25/1 Bit length : 31" Safety: Bit Lock Power：3.2kw Carburetor with pump Easy starting system (cord starter). Centrifugal clutch Change bits quickly and easily Weight : 10.85 Kg. (without bit) Accessories: Fuel Mixing Bottle Toolkit for assembly Type2:52 cc Engine: 52CC Gas Earth Auger Post Hole Digger Garden Holing Fence Post Digging Machine Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1 Please keep the choke to on position when the machine is in use! The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical details:Engine: Single Cylinder, 2-stroke, air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Safety: Bit Lock.Power: 1.9KW/7500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 10.35 Kg. (without bit).Rotational Speed：8500RPM horsepower: 2.4 ps Accessories:Fuel Mixing Bottle.Toolkit for assembly. Type3:4'' 6'' 8'' Drill Bits only3 bits: 4", 6" and 8".Extension Bar: 12".Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.Type4:52 cc Engine + 4'' 6'' 8'' Drill Bits Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1 Start steps: 1. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you dead lift) 2. Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better 3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper. Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. After breaking, you need to buy the starter again. Please keep the choke to on position when the machine is in use! The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.Ergonomically designed, it is accurate, easy to use and economical.Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.With this tool, you will be able to perform professional quality work.The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical details: Engine: Single Cylinder, 2-stroke, air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Bits : 4", 6" and 8".Bit length: 31".Safety: Bit Lock.Power: 1.9KW/7500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 10.35 Kg. (without bit).horsepower: 2.4 ps Accessories:3 bits: 4", 6" and 8".Extension Bar: 12".Fuel Mixing Bottle.Toolkit for assembly. Type5:(2.3HP)52 cc Engine + 3xDrill Bits Description:The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts,poles, trees, shrubs etc.Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily fora wide variety of tasks.Ergonomically designed, it is accurate, easy to use and economical.Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.With this tool, you will be able to perform professional quality work.The Earth Auger has a straight through gearbox, unlike models with a side mounted engine,the straight through design is much more robust and less likely to shear gears. Technical details:Engine: Single Cylinder, 2-stroke, air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Bits : 4", 6" and 8".Safety: Bit Lock.Power：1.7W/8500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 11.6 Kg. (without bit). Accessories:3 bits: 4", 6" and 8".Extension Bar: 12".Fuel Mixing Bottle.Tool kit for assembly.

Price: 178.34 USD

Location: Chino, California

End Time: 2024-12-27T05:35:37.000Z

Shipping Cost: 0 USD