Automatic Dental Plaster Model Gypsum Saw with Dust Removal Function

Description: Automatic Dental Plaster Model Gypsum Saw with Dust Removal Function - Undercut The machine is widely used in the dental repair industry and is a necessary equipment for separating gypsum models. The machine is flexible, multi angle cutting, high dimensional accuracy, and can make the separation of gypsum models more accurate. It has dust removal, Characteristics:1. Silent motor is used to drive the saw blade directly. There is no belt and other aging and wear parts, no power secondary transmission, and the transmission is more stable and accurate.2. The enclosed enclosure does not leak dust and better protects components.3. With dust removal, it is easy to clean the dust and better protect the working environment.4. Adopt undercut to better protect the abutment.5. The machine adopts automatic control, and the cutting and dust removal are automatically started at the same time when the platform is pressed. Relevant parameters:Voltage: 220V 50Hz / 110V 60HzMachine power: 220V 1100W / 110V 550WSaw blade size: 80 * 16 * 0.28mm Instructions for use:1. First, install the saw blade on the motor spindle with the wrench provided with the machine,2. Insert the power cord into the jack on the right side of the machine and connect it to the power socket,3. Hang the dust box on the rear side of the machine,4. Turn on the right power switch. At this time, the switch light is on, the auxiliary line is on, and the machine is in the machine state,5. Press down the platform and rotate the saw blade. At the same time, adjust the dust suction through the right knob. The larger the suction, the greater the noise. It can be adjusted appropriately according to the specific use situation,6. Put the gypsum model on the platform, adjust the position according to the auxiliary line, press the model and the platform tightly, and slowly press the platform to complete the mold separation,7. After working for a period of time, the dust box needs to be cleaned. Pull the bottom of the dust box backward, then lift the dust box upward, remove the dust box, twist the triangular screw, remove the mesh plate, pour out the dust, use the air gun to blow outward from the inner wall of the filter cartridge, and hang it again after cleaning. Precautions:1. Do not hit the saw blade, otherwise the SAW seam will be widened and the gypsum model cannot be used.2. The dust removal motor will generate heat during operation and needs to be cooled by air. The filter cartridge in the dust box must be cleaned regularly to ensure air permeability, otherwise the motor will fail due to poor heat dissipation.Delivery timeWe ship all orders within 72 hours after your payment finished. As for there are more products on our warehouse, so when you meet with some products are out of stock after you place order, just don’t worry, we will inform you for the first time. We hope you could understand, thanks! Client’s Full name and AddressDear clients, please inform us your full correct name and address, in case the package is returned. If the package be returned since you leave me wrong address, we don’t responsible for that. Customs TaxesWe don't undertake the Customs Tax, and not responsible if the package is blocked at Customs. Remote AreaWhen choosing DHL/FedEx, we wil check whether your address is a Remote Area. If it is, Remote Area Fee needed to be charged. Shipping methodSometimes we will change the shipping way and choose the most appropriate transport method for you, but transport time is the same, and it still have tracking information online. Wish you understand, Important Reminder1, Please open the carton when you receive the package and check if the goods are in good condition before the delivery courier leaves.2, If the goods are in good condition please sign it.3, If the goods are broken please take photo and refuse to sign it. Otherwise, we will unable to responsible for damage or breakage.

Price: 955 USD

Location: TianJin

End Time: 2024-03-23T02:13:16.000Z

Shipping Cost: 0 USD