Award Winner Built RPG Model 1/35 KBTM T-80U Mian Battle Tank +PE+Interior

Description: DREAM WORKS HERE Item Name: .KBTM T-80U Main Battle Tank Kits .RPG-Model Scale: .1:35 Builder:.The Libertine Item Status:.Built To Order / Pre-Order Detail features: Award winner built KBTM T-80U with superb overall details of mode. Beautiful woodland camo color scheme with top building quality. Add on etched brass set. Hatches and lot`s turret equipment device detail. Kontakt reactive armor with incredible detail. Finely detailed deck surface and side skirts. Great details on main gun and machine gun. Tracks and suspension detail. Adding gas drum, towing cable and more accessories. * Top building quality. * Add on Metal tracks full length set. * Add on PE frets, which include the screens, visionblock, skirtparts, smoke grenade tiedown, mounts, handle and many more. * Moulding quality is excellent with clean crisp detail on the parts. * Surface details are very well done with a mix of engraved/recessed details, weld lines, raised detail, bolt and rivet detail. * Cast texturing and flush screws on the turret for a good overall appearance. * The two multipart head lights and tail lights with great detail. * The brass bullet splash guard in the glacis are evry nice and thin. * Tow hooks, small position lights and driver’s pericopes and top cover w/detail. * The Commander’s hatch has excellent detail on both sides of the opening half as well as very detailed main sight. * Hatche with separate periscopes on the inside and outside plus a grab handle and latch on the inside is quite a detailed. * The main gun tube with thermal jacket is moulded in one piece apart from the separate muzzle cap with great detail. * The smoke dischargers have separate caps, which improve the look a lot. * The mantlet has nice texture on the canvas cover * The main sight have etched plate. * Two large Kontakt 5 ERA sub-assemblies and again the detail is very well done. * The large electrical ducting piping on the turret roof leading to the smoke tubes with great detail. * The large front searchlight is a fairly detailed. * Smaller details added to the turret include the four weapons pedestals, small lights and gunner’s sight for very busy appearance of turret. * The Kord 12.7mm Heavy Machine Gun is a very nice moulding with great detail. * The multi-part snorkel tube nicely detailed and matches reference photos well. * The main wading trunk is an impressive single large moulding that has the angled intake and the lower rectangular. * Added to the top of the truck is a preformed etched domed mesh cover and an outer etched ring. * The ammo boxes and other details added to the truck for great finish. * The lower hull with lot`s excellent detail with sides and lower front and rear plates included. * The engine deck has excellent details including raised and engrave detail as well as open intake grills for a nice appearance. * Working suspension with sharp details both side. * Detail on the idlers, road wheels and drive sprockets is very well done and matches the real things well. * The road wheel have the inner and outer wheels with hub cap, dish profile and nicely represented rim bolts. * The drive sprockets are also nicely detailed with the spoke outer sprocket with good definition on the outer bolts. * Correctly shaped inner solid sprocket disc, the final drive housings are also correctly shaped with the sprockets. * Metal tracks with very good detail on both including fully hollowed out guide horns which do look impressive. * APU (Auxiliary Power Unit) with great detail. * The large central exhaust box with nice details. * Small brass etched brackets to add along the hull sides to hold the cables in place. * Fuel drums have good detail. * Tow cables supplied as metal cable with great detail. * Adding onvehicle tools and more accessories. Airbrushed and painted, base color with primer for better detail and shading, multi-color filters for blend color effects, oil and water wash with panels, doors, rivets finishing, detail paint job on rust and paint chips off with scratches looking, worn and bare metal realistic simulating, flow rust and rain streaks effects, great exhaust grill representing, also smear and dirt with mud and dust appearing, dry brushing to emphasis and highlighting texture with edge for good wear and fading, more on real live heavy weathering with decals and unit markings, final protective layer for long term collection. 3168 1 Dream Works Hobby 2 Dream Works Hobby 3 Dream Works Hobby 4 Dream Works Hobby 5 Dream Works Hobby 6 Dream Works Hobby 7 Dream Works Hobby 8 Dream Works Hobby 9 Dream Works Hobby 10 Dream Works Hobby 11 Dream Works Hobby 12 Dream Works Hobby 13 Dream Works Hobby 14 Dream Works Hobby 15 Dream Works Hobby 16 Dream Works Hobby 17 Dream Works Hobby 18 Dream Works Hobby 19 Dream Works Hobby 20 Dream Works Hobby 21 Dream Works Hobby 22 Dream Works Hobby 23 Dream Works Hobby 24 Dream Works Hobby 25 Dream Works Hobby 26 Dream Works Hobby 27 Dream Works Hobby 28 Dream Works Hobby 29 Dream Works Hobby 30 Dream Works Hobby 31 Dream Works Hobby 32 Dream Works Hobby 33 Dream Works Hobby The T-80U main battle tank is a further development of the T-80. It entered service with the Soviet Army in 1985. Currently this main battle tank is in service with Russia, China (50), Cyprus (27) and South Korea (33). Production of T-80 series main battle tanks ceased in Russia in 1992, however its development and production continued in Ukraine. Due to expensive maintenance Russian Army planned to retire all its T-80 series tanks by 2015. However these tanks are still used. Furthermore a contract was signed to refurbish and upgrade older T-80BV tank in order to keep them operational. The T-80U has a welded hull and cast turret. Armor of this MBT was improved comparing with the previous version. It features composite armor and is fitted with built-in Kontakt-5 Explosive Reactive Armor (ERA) blocks. It is estimated that armor protection of the T-80U is equal to 900 mm against HEAT rounds and 1 100 mm against projectiles. This main battle tank is also fitted with automatic fire suppression and NBC protection systems. The T-80U is armed with a fully-stabilized 125 mm smoothbore gun, fitted with an autoloader. It fires armor-piercing, APDS, HEAT and HE-FRAG rounds. Effective range of fire with APFSDS round is 2 000-3 000 m day and 2 000-2 600 at night. Armor penetration is about 590-630 mm at 2 000 m range. The tank can also launch 9M119M Refleks (Western reporting name AT-11 Sniper-B) anti-tank guided missiles in the same manner as ordinary projectiles. These missiles have a maximum range of 5 km and can target low-flying helicopters. The missiles use a semi-automatic laser guidance and have a hit probability of 80% at 4 000 m range and 70% at 5 000 m range. Maximum rate of fire is 6-8 rounds per minute. Secondary armament consists of 7.62 mm coaxial machine gun and 12.7 mm machine gun, mounted on top of the roof. The T-80U MBT was originally produced with a GTD-1000TF gas turbine engine, developing 1 100 hp. Tanks produced in the early 1990s were fitted with a more powerful GTD-1250 gas turbine engine, developing 1 250 hp. It is a multi-fuel engine, which can run on kerosene, diesel, petrol or aviation fuel. It has servicing intervals significantly longer than of diesel engines, however is troublesome to maintain and has very high fuel consumption comparing with diesels. It can consume up to 750 l of fuel for 100 km driven. This engine can be replaced in field conditions within 3 hours. The tank is also equipped with auxiliary power unit, which powers main systems when the tank is stationary.

Price: 319.98 USD

Location: Scarborough, Ontario

End Time: 2024-01-23T21:15:09.000Z

Shipping Cost: 29.98 USD