BiXPower X75 Power Connector - 7.4 x 5.08mm Female Jack to 5.5 x 2.5mm Male Plug

Description: DC Power Connector Converter CNT-X75. One end of this connector is a 7.4 x 5.08mm female jack, and the other end is a 5.5 x 2.5mm male connector. The cable between two ends is made with high quality 16AWG wires. Total length from end to end is around 190mm (or 7.5"). This connector can change a 7.4 x 5.08mm male connector with center pin (Outside Diameter 7.4mm, Inside Diameter 5.08mm) to a 5.5 x 2.5mm male connector. 7.4 x 5.08mm connector is widely used in Dell and HP/Compaq laptop power adapters. Specifications: One end: 7.4 x 5.08mm female jack Another end: 5.5 x 2.5mm male barrel connector. Maximum current: 6A Middle cable: 16AWG wires Total length (from end to end) : around 190mm ( or 7.5") Note: This converter's female side will only accept round shaped connectors. You can not use this converter if your power adapter connector is not a round shape. Some Dell power adapters have octagonal shaped connectors, which will not fit the female side of this converter. The female jack can plug into a Dell or HP power adapter with 7.4 x 5.08mm male round shape connector like this: After you convert the 7.4 x 5.08mm connector to a 5.5 x 2.5mm male connector, you can use our C series connectors to convert the 5.5 x 2.5mm connector to other size connectors if you need. Cautions: The 5.5 x 2.5mm connector on the adapter can handle a maximum current of around 6A, which is around 120W at 19V ~ 20V. If you are using this adapter for more than 120W power, you can not use the 5.5 x 2.5mm connector on the adapter. You can cut off the 5.5 x 2.5mm connector and use inside two wires directly.

Price: 6.55 USD

Location: Irvine, California

End Time: 2024-01-15T17:33:24.000Z

Shipping Cost: 4.95 USD