*Black White Checker Racing F1 Auto Car Vinyl Wrap Sticker Decal Sheet Film

Description: Responsive Listing Template Home About Us Warranty Postage Contact Black White Checker Racing F1 Auto Car Vinyl Wrap Sticker Decal Sheet Film Free Tool Kit Requirement Size of 4”x8” DO NOT come with Tool Kit Size of 12”x60” Include 1 set of Basic Tool Kit Size of 24”x60” and above Include 1 set of Deluxe Tool Kit Limited 1 Set of Tool Kit for each Account ONLY regardless of quantity purchase Deluxe tool kit will be given if 12"x60" and 24"x60" or above are purchased together Item Specification: Thickness of film (C=10 micron): 15C±0.5C Thickness of film with release liner: 31C±0.5C Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition) Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 3 years when followed rules of application and use Application: from +10°С to +20°С, usage from -30°С to +30°С Dimensional stability: shrinkage less than 5% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005 Test result: 4-5 Exposure cycle: ASTM D4329-13 cycle A Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure Duration: 52h Description: Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition) Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners) Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter. Please check out our EBAY Store for more products Important - Free Tool Kit Require Purchase size OVER 12"x60" - Limited 1 squeegee & knife for each buyer weekly - Vinyl Wrap MUST use dry application for installation. DO NOT use wet application unless you are a certificated or professional installers. - Please install the vinyl over 75 degree in room temperature to avoid the tear issues. Vinyl Wrap will be more easily to get rip if the installation room temperature is too low - Please get all necessary tools such as squeegees, heat gun, 3M primer, 3M edge sealant, 3M spray adhesive and so on. - For complex curves, corners, edges, please use 3M primer 94 to make it sticker better. - Professional scratch-free squeegee is highly recommended to prevent scratches during the installation. - Please use a heat gun to heat the vinyl before reposition or lift up. - We are not responsible for any bubbles, ripping, cracking, tear, or scratches during the installation. These issues are consider as physical damage. Payment - Pay secure with any major credit card through PayPal. - Please pay within 3 days after auction ended. - Please confirm the mailing address correct when you make a payment. - Feedback will be left automatically after received buyer feedback. Please contact us before leaving a Negative & Neutral feedback. We would try our best to help you solving any problem. - Please feel free to contact us through EBAY message if you have any question, and we will get back to you within 24-48 hours. Shipping - Fast shipping from Industry, CA - Once your payment clears, most orders are processed & shipped out either the same or next business day. - Please ensure that the shipping address you provided at checkout is accurate. We are not responsible for un-deliverable or wrong shipping address issues. - We ship all of our items either via USPS / FEDEX. - Please notice that Sat, Sun and Public Holiday DO NOT count as a business day. For International buyers: - International shipping ETA 21-45 business days, please allow up to 1 month for custom clearance in some area / country. - Import duties, tax and charges are not included in the item price or shipping charge. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to buying. About Us - We are trying our best to describe all details of the product here. - Please feel free to contact us through EBAY message if you have any question, and we will get back to you within 24-48 hours. - Our business hours are Monday to Friday 10am to 6pm PST - Customer satisfaction is our priority. If you are not happy with the item that you purchased, please first contact us for more information. We will try our best to solve the problem with you. - Please leave us a positive feedback & rate 5 stars DSR if you receive the item. - We appreciate your business. - Happy Bidding & Have a nice day. Warranty - The RMA Number will be same as the EBAY ITEM NUMBER. Please write it with your EBAY ID, Date of purchased on piece of paper or outside the box, and return it with the item. - A 20% restocking fee will be charged. Shipping & Handling fee is not refundable. - Any faulty due to improper installation or improper use will NOT be covered by the warranty. Any physical damage such as soldering or modified bases will void the warranty too. - Buyer pay for all return shipping postage fee. - * All return & exchange must be in NEW & UN-USED condition ** Categories STORE PAGES Store home About Us Warranty Postage Contact Us If you have any questions or problems at all, please do not hesitate to Contact us Payment We accept payment through Direct Bank Deposit and Paypal. --> On Jun-21-21 at 15:31:18 PDT, seller added the following information:

Price: 4.99 USD

Location: Rowland Heights, California

End Time: 2024-11-06T22:51:28.000Z

Shipping Cost: 0 USD