Boyo VTB123HD Backup Camera

Description: Product highlightsflush-mount camera for side-view or backup use includes 19-foot video cable, 7-foot power and ground harness universal fit design mounts on side mirror or above rear license plate compatible with any radio with an RCA video input (most aftermarket models, only a few factory) selectable reverse image and parking guidelines 170-degree wide angle waterproof (IP67 rating) resolution: 720 x 480 pixels night vision rating: 0.2 Lux includes 20-foot video cable warranty: 1 year What's in the boxFlush-mount backup camera w/ attached 4' video cable (male composite video) and 7' power/ground wires 19' Video extension cable w/ integrated power wire (male composite video both ends) 21mm Hole saw bit User manual Product Registration card Warranty information About this itemWritten by Crutchfield's Jon PaulChoose rear-view or side-view Parking would be easy if it weren't for all the things in front of you, behind you, and to the side of you. Alas, many of today's cars and trucks make it harder than it has to be to see the things you'd rather not hit. The best way to take the stress out of parking is to improve your visibility, and the best way to improve your visibility is to add a camera. This versatile flush-mount camera from Boyo can be used as a side-view or a backup camera, so you can get the view you want where you need it. The universal bracket design can be mounted on your side mirror or above your rear license plate, with the power wire connected to your vehicle's blinker or reverse wire. With an IP67 waterproof rating, you can count on this camera even when the weather gets nasty. The HD CMOS image sensor gives you crystal-clear images and a 170-degree viewing angle. For more info, you can activate distance guidelines or choose reverse or normal imaging. Installing this camera yourself? Here's what you should know. What does it do? Unless otherwise noted, a backup camera is only intended for use backing up your vehicle. (If you require a front-view or constant rear-view camera, check for that capability.) What tools and supplies will I need? A panel tool, a wire cutter/stripper, a soldering iron, and a rosin-core solder with heat shrink tubing are recommended, along with whatever tools are needed to remove the radio from the dash. How much wiring is required? Wiring instructions vary from camera to camera. Some cameras have power wiring that can only be connected near the radio. Others let you power the camera at compatible reverse lights. In all cases, the camera must be wired for power and ground, the camera's video output must be connected to the radio/monitor, and the radio/monitor must be connected to a reverse trigger in your vehicle. Some radio replacement interfaces supply a reverse trigger wire for the radio -- using that wire to power your camera will damage the interface. Will the included video cable be long enough? You'll need to route the camera's video cable from its mounting location outside your vehicle into your vehicle's cabin and all the way to the screen in the dash. This often requires drilling a small hole in your vehicle or filing some metal and or plastic. You'll also need to estimate the length of cable needed to run from the camera to the dash, which will not be a straight shot. Each camera's cable length is listed.

Price: 49.99 USD

Location: Charlottesville, Virginia

End Time: 2025-02-02T22:40:33.000Z

Shipping Cost: 0 USD