CA-60 AC/DC Current clamp Transmitter Probe 60A CA-60

Description: AC / DC mA Current Clamp Product ID: CA-60 1. This miniature clamp meter features Hall effect sensors 2. For use with any multimeter with 200mV or/and 2V ranges for direct readout input impedance of least 1M ohm. 3. High conversion factor for low DC and AC mA measurement. 4. With the small jaw size it can fit into tight space in circuit panel or wire bundle to take the reading 5. The high frequency response at 20 kHz is useful for waveform monitoring on an oscilloscope. 6. Zero adjustment is made easy by just pushing the ZERO button. 7. It is best for locating small signal, industrial control, battery leakage and automotive usage Specifications: 0 ~ 60 Amp DC or AC current 9mm 3/8 " Conductor jaw opening capability, fits tight space Transformer ratio: 10:1, 100:1 1 mV/10mA or 1 mV/100mA conversion Frequency response to 20 kHz Accuracy: DCA : +/- 1.5% ACA : +/- 2% (40Hz ~ 2K Hz) ACA: +/- 4% ( 2K ~ 10KHz) ACA: +/- 6% ( 10K ~ 20K Hz) Output: 1mV/ 10mA, 1mV/ 100mA Monitor small signal, waveform and leakage Size: 7.7" x 2.8" x 1.3" Safety: Designed to meet IEC 100-1 , IEC 1010-2-032 CE CA-06 Adapter (Option) male BNC to Female 4mm Banana post adapter for receiving Signal output from CA-60 and able to be monitored by oscilloscope Optional accessory: CA-06 CA-60 AC / DC mA Current Clamp transmitter probe Measuring Range : 0~60A Clamp Caliber : 9mm (3/8“) Signal Output : 1 mV / 10mA or 1 mV / 100mA DC Accurary : ±1.5% AC Accurary : ±2.0% (40~2K Hz) / ±4.0% (2K~10K Hz) Frequency Response : 20K Hz Working Environment : 0~40°C / 30~80%RH without dew Storage Environment : -10~50°C / 35~70%RH without dew Elevation Limitation : Lower than 1,000 meters Power Supply : 1.5v Battery (AAA) x 2 Dimension : 7.7“ x 2.8”x 1.3“ Accessory : Battery、 Manual

Price: 124.16 USD

Location: Paducah, Kentucky

End Time: 2025-01-15T02:35:39.000Z

Shipping Cost: 0 USD