Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector

Description: Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4 Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - Works With All Liftmaster, Viking Access, Doorking, Elite, Eagle, Linear Gate OpenersNOTE: CP-4 IS NOT A SAFETY. YOU MUST ADD EXTERNAL SAFETY WHEN USING CP-4. SELF-CONTAINED SYSTEM WITH LOW STANDBY CURRENT - Open gates automatically as guests leave a property with this all-in-one system that works with electric or solar gates. Lowest standby current in the industry by 95%. All-in-one unit without external circuit board. Hook wires directly to gate operator. • CP-4 may be installed above ground by screwing “puck” directly to an immovable object. • If installed above ground, use conduit to mechanically protect cable (animals will eat). • Car should be going at least 5 MPH at sensor to be detected. Install CP-4 at least: • 6-10 feet away from buried power, telephone, or invisible dog fence • 10 feet away from natural gas lines • 20 feet away from power pole with a transformer • 100 feet back from railroad traffic • 200 feet away from high power substation power lines • 80-100 feet back from gate operator Payments & Returns Policy

Price: 189.99 USD

Location: Miami, Florida

End Time: 2024-02-13T19:02:34.000Z

Shipping Cost: 0 USD