Case of 25 - 4ft Color Tunable LED T8 Tube - Type B - 15W - 2200 Lumens

Description: Send us a message for larger quantity discounts. Case of 25 4ft. Color Tunable LED T8 Tube - Type B - 15W - 2200 Lumens By LumeGen This Color Tunable 4ft. LED T8 Direct Wire Tube is a perfect pick for any commercial or residential setting including super markets, factories, hotels, conference rooms, schools, and offices. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials! Made with frosted glass. This LED Tube is Type B meaning it is NOT compatible with fluorescent ballast. This tube requires the existing ballast to be removed from the fixture prior to installation and wires directly into line voltage. This LED Tube is configured for Single-Ended or Double-Ended Power and can utilize shunted or non-shunted sockets so you won't have to worry about changing lamp holders. This tube is also color tunable and allows the user to select between 3000K, 3500K, 4000K, 5000K, and 6500K packing a lot of options in 1 tube. Existing fluorescent ballast must be bypassed for proper operation! Notable Specs: Case of 25 Type B 4ft. Length 15W 32W Fluorescent Tube Equivalent 2200 Lumens Dimmable (Phase-cut requires compatible dimmer - see spec sheet) Color Tunable that allows selection between 3000K, 3500K, 4000K, 5000K, 6500K AC120-277V Input Voltage Single & Double Ended Power Frosted Glass lens UL Listed, DLC Standard DLC QPL ID: S-W4EQ6R Discover the Benefits of Plug and Play LED Tubes Plug and Play LED Tubes are here to stay! They make it easy to replace fluorescent tubes and upgrade your space with bright LED light. Plug and play tubes are easy to install. The process is easy as Step 1, 2, and 3.* Turn off power to the light being changed before installation using the switch on the breaker panel. Remove the fluorescent tubes. Remember - Fluorescent tubes contain mercury and should be disposed of properly. Install the LED tubes and turn the power back on. *Please make sure to read the instruction manual of the LED tubes and fixture the tubes are being installed into as the above instructions may not be 100% correct per the specific tubes or product. Can you put led tube lights in a fluorescent fixture? Can I replace my fluorescent T8 linear bulbs with LEDs? Yes! LED Tubes can be installed into a fluorescent fixture. When tubes are Type A + B. Type A or Type B, it is easy to replace those flickering fluorescents. A brief explanation of Type A and B LED linear tubes is below. Type A LED Linear Tubes are often called "plug and play" tubes. This is because they can simply be installed into the existing fixture. Type B LED Linear Tubes are often referred to as "ballast bypass." They work with all fluorescent fixtures including ballast-free fixtures. Type B linear tubes power goes directly to the lamp sockets and no longer through the ballast. Type A + B can be used with or without a ballast. It is ultimately the buyer's preference what they want to do. Type A installation uses the LED Tube + Ballast power for more energy consumption compared to Type B installation only uses the raw tube power and is more energy-efficient. What does ballast bypass mean? How does ballast bypass work? Ballast bypass means when installing the LED linear tube, the fixture's ballast will need to be removed first. The power will then go directly to the lamp sockets and no longer through the ballast. The benefits of ballast bypass LED replacement tubes include lights not being shut down by a ballast failure, no more ballast replacements, and savings on the energy bill because energy is no longer drawing

Price: 104.97 USD

Location: New Stanton, Pennsylvania

End Time: 2025-01-24T23:19:21.000Z

Shipping Cost: 9.95 USD