CFMOTO 800MT 800NK Fuel Dongle mod

Description: Please read description carefully before purchase Thanks ============================================================= This fuel dongle is a simple plug and play fuel mod, it trickthe ECU thinking it is colder than it really is, so increases the fueling to rich up the AFR. This dongle connects in series to the intake air temp sensor, IAT sensor is located under rider seat. You unplug the IAT sensor connector, one end of the dongle plugs directly on the IAT sensor & the other end of the dongle plugs into the bikes wiring loom IAT sensor plug to complete the circuit. this fuel mod will: Improves engine response at medium and high RPM. Smooth runing engine. Avoid instability, rattles and jerks. reduce engine coolant temperatures. Prevent engine overheat. No check engine light when use this dongle. this fuel mod isfor bike which fit with high flow air filter or aftermarket exhaust or decat. It will stop engine from running too lean in open loop. **This dongleWILL NOTWORK whenthrottles isless than 40% or under 5500 RPM.** ----------------------------------------------------------------------- EURO 5emission are tough, this engine is running very lean and hot. **This dongle adjust the fueling/ rich up the Air Fuel ratio in theopen looponly.** theopen loopis more than 40% throttles at any RPM or higher than 5500 rpms at any throttles inputfor most Euro 5 ECU. you should use the dongle if you are running a decat/ aftermarketmuffler/ aftermarket high flow air filter/ open air box or your APR is lean. This donglewill notadjust the fueling in the closed loop, the closed loop is less than 40% throttles, under 5500 rpms for most Euro 5 ECU. ----------------------------------------------------------------------- ECU will not reset IAT reading as long as dongle are connected Stage 1: Recommendfor bike fit with: Decat with pressure chamber or Aftermarketmuffler or Aftermarket high flow air filter or Open air boxor Stock bike but just want the engine runs cooler Stage 2: Recommendfor bike fit with: Decat with pressure chamberandaftermarketmuffleror Decat with pressure chamber andopen air box or Decat with pressure chamberandaftermarket high flow air filter Not recommendfor stock bike Stage 3: Straight Decat withaftermarketmuffler andaftermarket high flow air filter or open air box Not recommendfor stock bike Use link:https://www.ebay.com.au/itm/204244536146 Recommend ALWAYS has DB killer installed inaftermarketmuffler to prevent lower rev torque loss ------------------------------------------------------------------------------------------ Photo sample of dongle working on bike at 34C day. STAGE 1 ECU IAT reading is 21C STAGE 2ECU IAT reading is 13C STAGE 3ECU IAT reading is 5C ------------------------------------------------------------------------------------------- Place the dongle as photo showing to preventdamage when reinstall rider seat This dongle is for CFMOTO 800NK 800MT sport and touring Sensor on 800NK are behind fuel tank cover May fit other CFMOTO motorcycle which has same style connector

Price: 65 AUD

Location: Pooraka, SA

End Time: 2024-11-07T12:12:34.000Z

Shipping Cost: N/A AUD