Chariot 1 Ultra Keihin Carb billet Bowl CUSTOM NUT overflow tube Yamaha Banshee

Description: Listing is ONE BOWL *******Keihin PWK only********** NEW LARGEST CAPACITY BOWL WITH LARGER NUTS AND STAINLESS OVERFLOW TUBE ***NEW DESIGN*** Custom Nut is larger and allows access to both jets easily. ***Note the nut design has grooves to allow fuel in from below the top level of the nut. Note the grooves in the bottom of the bowl that allow fuel to flow into the nut from the bottom of the bowl. This eliminates the possibility of starving your motor of fuel because the nut was sucked dry.***More fuel capacity than ANY of our competitors. Lighter than our competitors BUT STRONG! Weighs just 8.5 ounces with all hardware. (competitor's is much heavier) Bottom of bowl is profiled to CLEAR the case. Has predrilled locations for one power jet fitting (included) or plug if not using powerjets (also included). Located out the back of the bowl. We addressed every clearance issue for the banshee. This bowl is not just a box for fuel. CHARIOT PERFORMANCE FOR THIRSTY ENGINES What is the purpose of oversize billet bowls? By providing more fuel your bowl won't be sucked dry at wide open throttle. Are all billet bowls the same? NO NO NO Only Chariot Performance bowls provide sufficient sump area for fuel retention at the jet pick ups. Chariot Performance bowls weigh 25% less than the competition. Chariot Performance bowls are carefully designed. They are not just a square box to hold fuel. Chariot Performance bowls are pre drilled and tapped for a power jet fitting (supplied). Plugs are supplied if you don't use a power jet. Do I need Chariot Performance billet bowls? YES if you have race ported cylinders. YES if you have after market cylinders. YES if you drag race with modified engines. What do Chariot Performance billet bowls prevent? Starving your modified engine from fuel can burn up pistons and worse (complete engine meltdown!!). These bowls prevent misses in acceleration from fuel starvation. Our bowls have overflow lines to prevent your engine from filling full of fuel if your float or needle sticks. What is included in this auction? ONE billet bowl with all orings, two power jet fittings, two plugs and 16 stainless fasteners. EVERYTHING needed to change out two Keihin carburetor bowl. The quality in design and craftsmanship we are known for! With the peak performance of todays two stroke engines it is cheap insurance on your investment to use oversize billet bowls with correctly designed features. Listing is for ONE bowls. Contact us if you are a dealer and wish to carry our products.

Price: 95.5 USD

Location: Dryden, Michigan

End Time: 2023-12-02T20:31:23.000Z

Shipping Cost: 7.5 USD