CircuPool Vertical Installation Kit

Description: Additional Images Reviews Vertical Cell Install These guys made this easy with this install kit. I didnt have the 16 pipe to install horizontal so they gave me this kit with my purchase. Works perfectly. I first put one leg together and left the cell piece for last. Using this method allowed me to make the correct cut out in the feed pipe. Once I knew the distance this kit would require, I made the cuts and began the install. The only minor challenge I had was with the O-Rings on either end. Got a little tricky keeping them in place as I postioned the Cell for install. But that was only another 5 min of work. Based on what I know now, I can install this in a much less time. I definitely recommend this kit if you dont have sufficient pipe space. Reviewed by: David from Montebello. on 5/31/2018 5/5 Works Great! I did not have enough room to install the new cell in my line. This had everything I needed although the instructions could have been clearer.. Reviewed by: (Verified Buyer) Vincent V from Pasadena, MD. on 7/12/2016 4/5 5 stars Easy installation for conversion from older model rj system. Reviewed by: (Verified Buyer) Michael Leahy from St. Peters. on 4/11/2017 5/5 Tight areas, no problem Great piece to assist in tight area without having to figure out the plumbing yourself. Reviewed by: (Verified Buyer) Mike from Staten Island, NY. on 5/18/2017 5/5 Helpful product If you are converting from a horizontal cell this contains all the parts you need with a clear picture of how to set the new cell up Reviewed by: (Verified Buyer) TOM from HERNANDO, fl. on 5/22/2017 5/5 Q & A Q: Universal Si40: Will the inlet (cord side) be reversed for vertical installation, the way it is pictured in your example? Asked by: Joe - 5/9/2019 A: Great question. With that model (or the RJ model in the picture) the cell can face either way. It does not matter which side is the inlet or outlet. Answer provided by: Discount Salt Pool (5/10/2019) Q: Is this for 1.5" or 2" pipe? Asked by: Dave - 4/19/2017 A: When used with the fittings that come with the saltwater chlorine generator, it can be plumbed into either size piping. Answer provided by: Nathan (4/19/2017) Q: How tall is the vertical installation kit? Asked by: Nate - 5/18/2018 A: Make sure you have about 16"-18" of space above your plumbing. Answer provided by: Nick (5/21/2018) Q: What parts exactly does the kit include? Thank you Asked by: Frank Garcia - 4/15/2020 A: This kit includes everything pictured except the actual components that belong to the salt chlorinator (the flow switch and the salt cell). It is all plumbing fittings and pipe needed to install the equipment as described. Answer provided by: Nathan (4/16/2020) Q: can Circupool vertical be set up horizontally? Have RJ 30; problems with space. Asked by: Dorothy Porta - 6/26/2018 A: Can you use this kit in a way that it orients the cell horizontally? I don't see why not. This system's cell and flow switch work whichever way they are pointed. Answer provided by: Vince (6/26/2018) Q: Will the vertical mounting kit work with the CircuPool Universal 40 cell? Asked by: ALLEN SEAVER - 6/28/2018 A: Good question, yes this will also work with the Universal40 model. Answer provided by: Discount Salt Pool (6/28/2018) Q: I'm converting from a Zodiac and want to be sure the spacing works. Is the 6 1/2" shown in the picture a center to center measurement or end to end? Asked by: Sstep - 9/8/2019 A: I believe it is the width of the gap to cut in the plumbing in order to fit the kit in between. Answer provided by: Charles (9/9/2019) Q: I have just enough space to maybe not use this but if I decide to get this. I have 2 questions. The 1st is will it decrease pressure in the system because of adding a vertical section. So I would have to run my vari. Pump at a higher setting? And the second is could I put this in horizontal? Thanks. Asked by: Dan - 4/18/2020 A: I would be surprised if the 4 extra fittings in this kit creates a meaningful impact on flow. If you mean by putting this in horizontal, to attach this kit to a vertical pipe, it might stick out but it should not make the salt system work any differently. Answer provided by: Tim (4/19/2020) Q: What is the center to center of the upright pipes without the elbows? I have a compu pool generator with the 4 1/2" center to center and no room to cut the pipes and redo them Asked by: Bruce - 7/2/2020 A: If you have a CPSC model, this kit will work with your existing fittings as well so that you do not have to replumb. Answer provided by: Nathan (7/2/2020) Q: Are the parts of the CircuPool Vertical Installation Kit glued together. I would need to adjust the spacing between inlet and outlet. Asked by: louyo - 4/30/2021 A: No, the parts come with instructions for assembly. Answer provided by: Lawrence (4/30/2021)

Price: 55 USD

Location: Tomball, Texas

End Time: 2024-12-27T16:34:28.000Z

Shipping Cost: N/A USD