Cisco Refresh AIR-PWRINJ6 Power Injector 802.3at for Aironet Access Point

Description: Cisco Aironet Power Injector AIR-PWRINJ6 802.AT For Access Points Cisco Aironet Power Injector AIR-PWRINJ6 Overview: Cisco Aironet Power Injector AIR-PWRINJ6 add efficient PoE connectivity to your network. Cisco Aironet Access Points providing an alternative powering option to local power, inline power-capable multi-port switches, and multi-port power patch panels. This power injector is for use with the Cisco Aironet 2800 series and 3800 series access points. A Category 5 or better Ethernet cable connects the injector to a 10/100/1000 Ethernet switch, hub, or network, and another cable carries power and data to the access point's WAN Ethernet port. The power injector’s built-in power supply has a C13 connector that connects to a wall outlet or power strip. The power injector connects to a wall outlet or power strip. This single-port PoE+ injector provides up to 30 Watts and is compliant with IEEE 802.3AF (15.4 W) and IEEE 802.3AT (30 W) systems. CISCO POWER INJECTOR AIR-PWRINJ6 FOR AIRONET ACCESS POINT - ORDER NOW Cisco Power Injector AIR-PWRINJ6 FeaturesDimensions: (W, H, L) 53 mm x 32.5 mm x 140 mm, 2.09 in x 1.28 in x 5.5 inData Rates: 10/100/100 MbpsPoE injector - externalAC 100-240 V Input Voltage49 - 60 Hz Frequency RequiredCompliant Standards - IEEE 802.3atDesigned For Cisco Aironet 2802E, 2802E (Config), 2802I, and 2802I (Config)PoE Output: Pin Assignment and Polarity, 4/5 (+), 7/8 (-), Output Power Voltage 55 V DCInput Power Requirements: AC Input Voltage: 100 to 240 V AC, AC Input Current: 0.67 A @ 100 - 240 V AC, AC Frequency: 50 to 60 HzWeight: 0.44 lbs (200 g)Connectors: Shielded RJ-45, EIA 568A and 568BReliability MTBF: 100,000 hrs @ 25ºCThermal Rating: 20 BTU/Hr @ 240 V AC

Price: 49.99 USD

Location: Fairfield, New Jersey

End Time: 2024-08-24T18:20:18.000Z

Shipping Cost: 5.9 USD