Concealed Thermostatic Shower Constant Temp 3-Way Shower Mixer Valve Set

Description: Concealed Thermostatic Shower Constant Temp 3-Way Shower Mixer Valve SetDESCRIPTIONWhen you go home after a busy day, enjoying a comfortable shower is enough to take away the tiredness of the day so that you can better enjoy life. Our thermostatic shower diverter valve can help you adjust the proper water temperature to make your shower more comfortable. The durable copper material and wire drawing process make the product more smooth and bright. The constant temperature design and three functions fully take care of the children and the elderly at home, so you can use it with confidence. With this product, you can enjoy your own bath time.KEY FEATURESHigh-end Material: This item is made of copper with good durability, which is not easy to rust and is corrosion-resistant. Therefore, you can use it for a long time without frequent replacement, which can save your use cost after a certain time.Exquisite Process: The shower diverter valve adopts the wire drawing process, which makes the product surface smoother and brighter, so you can clean it easily with a towelMultiple Functions: The shower diverter valve is equipped with 3 push buttons, which can be applied to most 3-function showers to achieve three different shower functions. At the same time, the three functions can be used independently or simultaneously, which provides more convenience for you to enjoy your bath time.Safe and Reliable: The shower diverter valve uses a thermostatic valve element to ensure a constant temperature. It can be safely stopped at 38 °degrees (100℉), which can effectively prevent scalding in the shower. This design is especially suitable for children and the elderly.Precise Temperature Control: The spool of this item has accurate temperature control, you can easily control the temperature in the range of 4-85℃/39.2-185F with the temperature handwheel.Beautiful Appearance: The shower diverter valve is golden, giving a sense of luxury. With smooth lines, it can make your bathroom more attractive and bring in you a good mood.Easy to Use and Maintain: A detailed manual is provided in the package of the shower diverter valve. You only need to follow the steps, which saves you time.Humanized Design: The box of the shower diverter valve is marked with cold and hot water, which is very clear and convenient for you to adjust the temperature without confusion.DETAILSEmbedded Box: This product is made of a plastic embedded box that not only makes the installation more aesthetic but also can better protect the valve body from damage, making it easy to install and maintain. Check Valve: This shower diverter valve has a built-in check valve, which can effectively prevent backflow and bring you a better bath experience.APPLICATIONIt is suitable for all kinds of bathroom bathtubs with three functions: hand shower, waterfall shower and overhead shower. It is suitable for installation in inlets and outlets with G1/2" threads, as well as for installation on solid and hollow walls.How to Use1. Open or close the water outlet independently through the buttons.2. Adjust the thermostatic handwheel on the right to adjust the outlet water temperature.HOW TO INSTALLOpen the wall to dig the main body embedded port, the hot and cold water inlet, and the mixed water outlet.Drill four 6mm/0.24inch holes with an impact drill according to product size.Use a hammer to break four expanded capsules into the drilled holes.Connect each takeover, then connect the water source to confirm that there is no leakage.Adjust the embedded body to the horizontal line and fix the embedded body on the wall with a cross screwdriver to lock the 4 self-tapping screws. Seal the pipeline with cement filler. Loosen the two M5 screws on the sheath counter-clockwise with a cross screwdriver and remove the sheath.First remove the color button of the constant temperature handwheel loosen the main handwheel in the counter-clockwise direction with the 2.5mm/0.1inch hex plate, and remove it. When taking out the constant temperature handwheel, do not turn the constant temperature handwheel to ensure that the constant temperature handwheel button is aligned.Tighten the three long poles on the key value core, flatten the wall on the set, and cut off the extra parts with a cutting machine or blade to extend the positioning plate plane of the long rod. Then go to the positioning board and press the icon.Balance the panel on the main body.Put the accessories of the constant temperature handwheel in the opposite direction of the unloading on the main body, ( pay attention to the constant temperature handwheel installation to ensure that the valve core does not turn, the button direction is aligned with the direction of the outlet pipe.HOW TO MAINTAINTo keep the product surface clean and bright. Clean frequently.Rinse with clean water and then dry with a soft cotton cloth.Do not use any abrasive cleaner, abrasive cloth, or abrasive paper.Do not use any acidic cleaner, polishing agent, soap, coarse cleaner, or polishing liquid with an abrasion effect.When the water output decreases or the temperature is difficult to adjust, please follow the steps below to remove the impurities on the flow net:Labor shall be employed to disassemble the water inlet fittings on both sides of the body group;Do not wash the impurities attached to the filter screen on the check water inlet block;Reinstall the accessories in sequence, and then open the cold and hot water supply sources on the body group.SPECIFICATION Model: V-002TPOverall Material: CopperMaterial of Embedded Box: PlasticSurface Process: Wire DrawingColor: GoldenInstallation Method: Wall-mountedPre-embedded Depth Range: About 67mm/2.64inchWater Pressure Range: 0.1-1.0mpaWater Temperature Range: 4-85℃/39.2-185FHot Water Temperature: 55-85 ℃/131-185F (65 ℃ is Recommended)Cold Water Temperature : 4-29 ℃ /39.2-84.2F (15 ℃ is Recommended)Suitable Thread: G1/2''Net Weight: 3kg/6.61lbsGross Weight: 3.3kg/7.28lbsPackage Size: 24*20*18cm/9.45*7.87*7.09inchProduct Size: 15*17cm/5.91*6.69inchPACKAGE INCLUDED1* Thermostatic Shower Diverter Valve 1*InstructionsAll Accessories for AssemblyNOTESThe valve core of the main body has been tested and adjusted in the factory, please do not disassemble it by yourself.The side marked with "c" of the main body is connected with cold water, and the side marked with "H" is connected with hot water, which cannot be reversed. The water pressure at the cold and hot water inlet ends shall not differ too much. (Pressure difference between two ends ≤ 20%).The working water pressure of the valve element is 0.1-1.0 MPa (including cold and hot water pressure). It is recommended to use 0.3MPa working water pressure. If the working water pressure exceeds 1.0MPa, please install a pressure-reducing valve on the pipe.The temperature displayed on the scale of the thermostatic handle is adjusted under the specific water temperature conditions of the factory, and the product may change due to the change in the working water temperature. If there is a difference, it is normal that the difference is less than 2 ℃. If the difference is large, it should be re-debugged by professional debugging personnel.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.BrandUnbrandedModelV-002TPOverall MaterialCopperMaterial of Embedded BoxPlasticSurface ProcessWire DrawingColorGoldenInstallation MethodWall-mountedPre-embedded Depth RangeAbout 67mm/2.64inchWater Pressure Range0.1-1.0mpaWater Temperature Range4-85℃/39.2-185FHot Water Temperature55-85 ℃/131-185F (65 ℃ is Recommended)Cold Water Temperature4-29 ℃ /39.2-84.2F (15 ℃ is Recommended)Suitable ThreadG1/2''Net Weight3kg/6.61lbsGross Weight3.3kg/7.28lbsUPCdoes not applyOn Nov 7, 2024 at 23:27:46 PST, seller added the following information:

Price: 128.37 USD

Location: Chino, California

End Time: 2024-12-08T06:16:03.000Z

Shipping Cost: 0 USD