Concrete Floor Grinder Walk-Behind Polisher 3 plate 220V 3HP Foldable 10"

Description: Floor grinding and trimming machine 220V Features: 1. The pure copper motor is of high quality and the product is sturdy and durable. The new statorand rotor of the motor can easily realize the conversion of electrical energy and mechanical energy. 2.Round strong magnetic grinding head, hard, wear-resistant, work efficiency and high quality. 3.High performance, stable life, long service life. 4.Highly adaptable cement floors can also be fully hardened and work can be done at the root of the wall,adjustable position of chassis. 5.Power cord without plug. Precautions For Use: 1. The input voltage should not be too low. 2. When using, first lift the machine head off the ground,and then turn on the switch. When the machine head rotates normally, gently place it on the ground. 3. When working, the machine head swings left and right, then moves forward, and cannot stop in place. 4. In case of power failure during operation, the switch should be reset and cannot be stopped at the original position to avoid burning the motor when the power is on. 5.If a generator is used to provide power, the output power of the generator must be at least 7KW. Parameter: Voltage: 220V Working width: 280mm Number of grinding head: 3 PCS Motor power: 2.2KW Speed: 1430 RPM Weight: 77 kg Work Depth：0-3mm Round strong magnetic grinding head is used for ground grinding, and resin grinding disc is used for polishing. Give away 5 meters of wires. The maximum length of the machine can be connected to 90 meters of wires. The specification is three-core wires. Each wire should not be less than 6 mm ² of pure copper wire. The wire must be connected to the air switch, and the rated current of the air switch is about 63A. Item Number: Floor grinding and trimming machine 220V (239208)

Price: 1286.86 USD

Location: Rancho Cucamonga, California

End Time: 2024-12-13T17:06:01.000Z

Shipping Cost: 329 USD