Description: CONFAST 3/16" x 2-1/4" Blue Flat Phillips Concrete Screw x Product Details Package Dimensions : 5.04 x 3.43 x 2.6 inches; 1 Pounds Manufacturer : CONFAST Material: Carbon Steel - Blue Coated Drive System: Phillips Head Style: Flat Countersunk Phillips Exterior Finish: Steel Thread Size: 3/16 inches BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver SELF-TAPPING-Taps threads directly into masonry and requires no other anchor DIAMOND POINT-Easier to drive the screw to save time ApplicationsThe anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being Diameter/Bit DiameterThe anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Driver RequiredA #2 is required for driving the anchor into the base material.Diameter of Anchor The diameter of the anchor is 3/16".Length Anchor The length of the anchor is 2-1/4"Thread LengthThe length of the threads on the anchor is 1-3/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3/4" to 1-1/4". This will ensure that the minimum embedment of 1" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4".Spacing between AnchorsEach anchor must be spaced a minimum distance of 3" from each other when measured center to DistanceIt is very important not to install the anchor any closer than 2-1/4" from an unsupported edge of the concrete.
Price: 26.04 USD
Location: Spring Valley, New York
End Time: 2025-02-03T23:11:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Model: Does not apply
California Prop 65 Warning: Does not apply
Country/Region of Manufacture: Does not apply
Unit Quantity: Does not apply
Unit Type: Does not apply
Package Dimensions: 5.04 x 3.43 x 2.6 inches; 1 Pounds
Manufacturer: CONFAST
Material: Carbon Steel - Blue Coated
Drive System: Phillips
Head Style: Flat Countersunk Phillips
Exterior Finish: Steel
Thread Size: 3/16 inches
Size: 3/16" x 2-1/4"
Brand: CONFAST
MPN: Does not apply
