Revere

CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 20)

Description: CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 20) ZINC PLATED - Helps prevent rust in dry environments WIDE RANGE OF SIZES - Insures proper fastener for best results PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 3/4".Length Anchor The length of the anchor is 5-1/2"Thread LengthThe length of the threads on the anchor is 3-1/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 3-1/4". Therefore, the anchor must be installed so that a minimum of 3-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 3-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/4" diameter anchor requires the hole in the fixture to be 1".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between 150 - 175 ft./lbs.Spacing between AnchorsEach anchor must be spaced a minimum distance of 7-1/2" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 3-3/4" from an unsupported edge of the concrete.

Price: 88.99 USD

Location: Miami, Florida

End Time: 2024-12-31T18:44:06.000Z

Shipping Cost: 0 USD

Product Images

CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 20)

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

MPN: WA34512

Brand: CONFAST

UPC: Does not apply

EAN: Does not apply

Recommended

CONFAST 5/8" x 12" Wedge Anchor Zinc Plated (Box of 30)
CONFAST 5/8" x 12" Wedge Anchor Zinc Plated (Box of 30)

$119.99

View Details
CONFAST 3/16" x 2-1/4" Blue Flat Phillips Concrete Screw x
CONFAST 3/16" x 2-1/4" Blue Flat Phillips Concrete Screw x

$23.04

View Details
CONFAST 1/4" x 3-1/4" 316 Stainless Steel Wedge Anchor (10 per Box)
CONFAST 1/4" x 3-1/4" 316 Stainless Steel Wedge Anchor (10 per Box)

$38.67

View Details
CONFAST 1/2" x 5-1/2" Galvanized Wedge Anchor (Box of 25)
CONFAST 1/2" x 5-1/2" Galvanized Wedge Anchor (Box of 25)

$57.99

View Details
50 Pack Nylon Selfdrilling Drywall/hollowwall Anchor Kit With Screws 25 Anchors
50 Pack Nylon Selfdrilling Drywall/hollowwall Anchor Kit With Screws 25 Anchors

$11.68

View Details
(QTY 1) CONFAST Flat Phillips Concrete Screw 1/4"x 2-1/4" CSF14214 Fast Shipping
(QTY 1) CONFAST Flat Phillips Concrete Screw 1/4"x 2-1/4" CSF14214 Fast Shipping

$18.87

View Details
CONFAST LDC124 1/2" x 4" Zinc Plated Large Diameter Concrete Screw for Anchor...
CONFAST LDC124 1/2" x 4" Zinc Plated Large Diameter Concrete Screw for Anchor...

$45.75

View Details
CONFAST 5/8" x 6" Wedge Anchor Zinc Plated Box of 20
CONFAST 5/8" x 6" Wedge Anchor Zinc Plated Box of 20

$82.68

View Details
CONFASTĀ® 3/8" Threaded Rod Anchor for Concrete, Vertical 1/4" x 1-1/2" Box of 25
CONFASTĀ® 3/8" Threaded Rod Anchor for Concrete, Vertical 1/4" x 1-1/2" Box of 25

$30.00

View Details
CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 6)
CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 6)

$28.99

View Details