Controller Hiniker V Plow Control Spring Return Wing Handheld 1850, 1851, 1951

Description: he Hiniker V Plow controllers are different depending on if it has dual-acting angling cylinders or single-acting.This is a New Handheld Control for the Hiniker V Plows (part # 36014021).This is for the V plows with the single acting cylinders model # 1850, 1851 and 1951. This has the correct plugs on it - no adapters. Plugs right in and replaces the factory control. This has one-button functions, so every function can be done with one button, much nicer that the OEM Hiniker control. This has two round plugs. One is seven pins and one is three pins. There is no light switch. It has a looped wire so when the controller is plugged in, the plow lights will be on. You can add a switch to the loop.V Plow Aftermarket Control Instructions.Aftermarket Control U-Set Instructions.Control plugs directly into your existing harness. NO adapter required. Just Plug-N-Plow.Make sure the connector matches your connector before ordering.Automatic shut-off when not in use (approximately 22 minutes).The plow blade will coast to a soft stop (left or right) resulting in smoother operation and decreased wear on the plows hydraulic system.Express Up/Down Feature.On/Off switch can be used as an Emergency Stop when required.Illuminated keypad on control for night time plowing.All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain. Up button times out after 2.6 seconds, while left and right functions time out after 3 seconds.Flexible Straight Cord.Use for both Left or Right Hand.Dash Mount Control Holder Included.Instructions come with each control.Designed and Manufactured in the U.S.A.

Price: 269 USD

Location: Jamaica, New York

End Time: 2025-01-30T01:37:08.000Z

Shipping Cost: 0 USD