DA-06 AK449x Bleutooth 5 XMOS USB DAC Balanced HD Exterior Sound Card

Description: Features: With Qual-comm Bleutooth 5.0 Module, suports aptx, aptx-hd, offer a good bleutooth connection With TI TPA6120 Heaphone module, offer a hifi level headphone output function The Xu208 Xmos chip for USB receiver , provide genuine exclusive xmos driver AK4495 supports DSD128 and PCM384K, AK4493 supports DSD512 and PCM384K. (with AK4495 option) Coaxial, BNC support DOP64 and PCM192K, fiber support DOP64 and PCM176.4K. With remote control function, remote control channel switching, volume addition and subtraction, mute control. There are balanced output, unbalanced output, amp output (optional) and so on. Aluminum alloy wire drawing process panel, thin steel plate box, aluminum alloy wire drawing process cover, both beautiful and well shielded. Using R cattle power supply, the smallest magnetic leakage, the highest efficiency. Digital, analog power supply independent winding, independent rectification and filtering, power supply. The standard operational amplifier is: OPA2134PA two pieces, OPA2604AU one piece. Parameters: Dimensions: 260mm wide, 167mm deep, 55mm high (without knob, foot, connector size) Frequency response: 20Hz-35KHz Signal to noise ratio: 110dB Harmonic distortion: normal port output: <0.001% Support 16bit, 24bit digital stream Support the following sampling frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192KHz, 384K AK4495 support: DSD64, DSD128 AK4493 support: DSD64, DSD128, DSD256, DSD512 Output level: balanced output 9V, unbalanced output 2V Dynamic range: 120dB Input impedance: number 75 ohms Line output impedance: 600 ohms Input voltage: 110V-120V or 220V-240V 50/60Hz Net weight: about 2Kg Gross weight: 3kg AK4495 Version: AK4493 Version: DA-06A front and rear panel function diagram (1) Power switch (POWER): Press the lock to turn on the power, the Power indicator will light, and press again to release the power. (2) Digital stream information display and remote control receiving window. (3) Channel status indicator, the corresponding indicator of the strobed channel is lit. (4) The power indicator light is lit to turn on the power. (5) Channel status selection button, each time the channel is pressed, the channel is strobed. (6) The digital input signal is ready for indication. (7) Volume control knob, clockwise to increase volume, counterclockwise to decrease volume (8) USB input port, this interface is used by both mobile phone and computer, the mobile phone is connected through OTG cable; Pc is connected to MAC or Windows system uses Usb cable. Support WIN7 and above systems, MAC free drive. (9) Coaxial coaxial signal input interface. (10) Optical fiber digital signal input port (11) Bleutooth antanna. (12) Headphone jack, matching 32 Euro-600 Euro headphones (13) Right channel balanced output port (14) The left channel unbalanced output port is engaged with the left channel of the parallel amplifier. (15) The right channel unbalanced output port is connected to the right channel of the parallel amplifier. (16) Left channel balanced output port (17) standard power switch: 110V - 230V grid voltage switch. (To prevent damage caused by user misuse, the domestic default 220V) (18) AC power input. Remote control button function description: Up: switch channels up Down: Switch channels down Vol- : Volume reduction Vol+ : Volume increase Mute: mute

Price: 195 USD

Location: ezhou

End Time: 2025-01-23T13:26:43.000Z

Shipping Cost: 50 USD