Dakota Digital Analog Dash Gauges Carbon Blue for 59-60 Impala VHX-59C-IMP-C-B

Description: Normal 0 false false false EN-US X-NONE X-NONE Dakota Digital Analog Gauges with Carbon Fiber Style & Blue Backlighting Fits: 59-60 Chevy Impala VHX-59C-IMP-C-B Made in the USA! 1959 marked a change in the GM lineup, and the dash in ’59 and ‘60 Chevy’s was a homerun, extremely popular still today. Fitting into the stock instrument housings of all 1959-60 Chevy full size cars, including El Camino, this kit brings modern information to a classic design with no alterations. Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday's traditional approach to instrumentation. A few of the features which you don't normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! The new VHX Systems fit directly into the stock instrument bezel of a 1959-60 Chevy Impala without modification, adding a wealth of features to this iconic vehicle. Bezel Not Included - Shown for Demonstration Purposes Only VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F (uses your factory Fuel Sending Unit, or you can purchase a generic SEN-06-1 Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters: 0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges: Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night. Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request). Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build. Although Dakota Digital instrument systems are programmable for both day and night intensity levels, the DIM-1 will allow rotary, or on-the-fly brightness adjustment added convenience. Dakota Digital is proud to introduce the BIM Expansion modules for Dakota Digital VFD, VHX and HDX instrument systems. The introduction of the Dakota Digital BIM modules allow you to add up to an additional 16 gauges, that's right we said SIXTEEN specialty gauges to your vehicle without the need to cut extra holes in the dash or installing pillar and pod mounts to your columns or under the dash.

Price: 925 USD

Location: Simi Valley, California

End Time: 2024-12-30T16:01:50.000Z

Shipping Cost: N/A USD