DAS-6 PRO Clay BAR Of Decontamination Medium 100 Gr

Description: DAS-6 PRO clay decontamination bar medium.The DAS-6 PRO medium decontamination clay allows the removal of contaminants found on the surface of the bodywork (varnish, lacquer, windows).Thanks to its special detailing formula, it limits application defects (marring).You can treat different types of contaminants with our clay (bird droppings, traces of paint, oxidation, tar, etc.).Why do a decontamination of your car before a correction?Before polishing a vehicle, we will of course give it a wash.If we are rigorous, we will do a pre-wash and then a manual wash with a neutral shampoo.But have we removed all the contamination present on the vehicle?Each wash will remove a lot of dirt. Problem. A large part? But not at all ?And no. The smallest dirt is always there, nesting in imperfections in the varnish. If you run your hand over your body, you feel it, at least you don't feel a smooth surface, but a very slight roughness, nothing major because it is not visible, but significant enough to threaten our polish.Indeed, when we are going to start our correction with our polisher, our pad with its polish will be in contact with its microparticles and with their force will tear them from the bodywork. They will nest inside the pad and will act on our correction by bringing their aggressiveness as dust and voila, we make holograms during our polishing.We chose an orbital polisher to have as few defects as possible and yet we create them.Nothing is lost, it is easy to remove this contamination.How to use our decontamination clay (clay bar) DAS-6 PRO medium?Provide a lubricant or make it yourself :) with 1 liter of demineralized water in which you will put 2 or 3 caps of your favorite shampoo.Knead your clay in your hand to soften it and create a disc about 7 to 8 cm in diameter.Spray your lubricant on your clay and on the surface to be treated (wear gloves).Gently rub your clay on the surface. Lubricate regularly.The DAS-6 PRO medium decontamination clay allows the removal of contaminants found on the surface of the bodywork (varnish, lacquer, windows). And no. The smallest dirt is always there, nesting in imperfections in the varnish. If you run your hand over your body, you feel it, at least you don't feel a smooth surface, but a very slight roughness, nothing major because it is not visible, but significant enough to threaten our polish. Indeed, when we are going to start our correction with our polisher, our pad with its polish will be in contact with its microparticles and with their force will tear them from the bodywork. They will nest inside the pad and will act on our correction by bringing their aggressiveness as dust and voila, we make holograms during our polishing. Provide a lubricant

Price: 13.43 USD

Location: Afa

End Time: 2024-09-04T17:24:50.000Z

Shipping Cost: 16.43 USD