Dental Lab Marathon Micromotor Straight Handpiece/Contra Angle Polisher +10Burs

Description: Packing : 1. Power Control unit. (AC110V): 1PC2. 35K R.P.M. CONTRA-ANGLE Connectors 3. Foot ON/OFF Control system: 1PC4. Handpiece Support: 1PC5. Straight Handpiece: 1PC6. Contra-Angle Handpiece: 1PC 7. Set of 10 pcs Drills Burs in one plastic box Note:Burs only for Straight handpiece not Contra Angle handpiece Important reminder: To avoid the problem of speed loose control and maintain long lifespan of this machine,please do turn the speed to "min" with the speed controller before start the following operation : push "on"or"off" button, Switching bur running between clockwise and reversed or Switching control between manual and foot pedal. Attention: please remember to make the speed controller zero when switch on or off the machine and when you do Reversible Switching. 1. Marathon Electric Polish control box+micromotor handpiece Attention: The bur for Contra-Angle Handpiece must have a card slot (the diameter of the bur handle: 2.35mm) Product Information: 1. Compact sized control box with precise smaill & strong micromotor handpiece2. Very High-powered and quality 0-35,000rpm4. tips size :2.35mm5. Tool exchange method using cam (twist the handle counter-clock wise to change the bur and can be easily restored back to the original position)6. Non stage speed system(it's well designed to output from zero to 35,000rpm by using non stage speed system)7. Right & Left turning ability8. Foot ON/OFF switch system 2. Contra angle handpiece- Low Speed 22,000-27,000 rpm.- The shank of the instrument mounted therein is 2.35 mm- Fastening of the instruments with a turning latch- Autoclavable 135°C- For any lab or E-type motors3. Straight Nosecone- Working pressure: 0.3MPa (4-hole) - 0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure).- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)- Noise: ≤68dB - Air consumption: about 56L/min- Ratio: 1:1 3. Dental Lab Steel Carbide Burs for Polishing Teeth Drill Handpiece 2.35mm Description: Shank Diameter:2.35mm/ Fit for Dental Handpiece with 3/32 inch collect The main features of carbide rotary burs: It can be used in processing all kinds of metals(it involved all kinds of Hardened Steel)and nonmetal(such as marble, Jade, bone ) The hardness of the workpiece is up to

Price: 113.16 USD

Location: Chino, California

End Time: 2025-01-11T03:40:08.000Z

Shipping Cost: 0 USD