Dinan D760-0055 Cold Air Intake

Description: Compatible with 2019-2021 BMW 330i; In the quest to be all things to all people at an attractive price point the 330i has been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 330i comes with a utilitarian and lifeless air box housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give 330i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc). At the same time the Dinan kit unveils a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of the semi-open design. In order to accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased flow and sound, the outwardly visible system is made of immaculate carbon fiber so the under the hood appeal is vastly improved over its drab and utilitarian beginnings. In and of itself, making it worth the price of admission.; Menu About Us Feedback View All Listings Warranty Shipping Dinan D760-0055 Cold Air Intake Click to enlarge Part Number: Product Description Compatible with 2019-2021 BMW 330i; In the quest to be all things to all people at an attractive price point the 330i has been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 330i comes with a utilitarian and lifeless air box housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give 330i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc). At the same time the Dinan kit unveils a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of the semi-open design. In order to accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased flow and sound, the outwardly visible system is made of immaculate carbon fiber so the under the hood appeal is vastly improved over its drab and utilitarian beginnings. In and of itself, making it worth the price of admission.; Outflows factory intake by 58% or more. Enjoyably louder, sportier sound. Beautifully crafted carbon fiber construction (lid and tube). Improved throttle response Larger volume air box (60% larger than stock). 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow. Quick and easy installation Categories Air Induction & Fuel Delivery ATV, UTV, Motorcycle & Marine Audio & Mobile Electronics Books, Literature & Videos Brakes Chassis & Suspension Cooling & Heating Data Acquisition Engine & Engine Components Exhaust Exterior Accessories Fasteners & Hardware Fittings & Hoses Gaskets & Seals Gauges Ignition & Electrical Interior Accessories Lifestyle, Clothing & Memorabilia Lighting Oil, Fluids, & Chemicals Outdoor & Overlanding Safety Equipment Tools & Shop Equipment Trailer, Towing & Winches Transmission & Drivetrain Wheels & Tires Brands Accel Accel Motorcycle Advanced Fuel Dynamics Allstar Performance AmmoTenna AMP'd Anntenworks Anvil Off-Road APR ARP Auto Ventshade Autometer Axxess B&M Ballistic BBK Performance Belltech Brawler Bright Earth Bushwacker Canton Racing Cataclean Centerforce Champion Plugs Cometic Comp Cams Competition Engineering Daystar Daytona Lights Demon Detroit Speed Diablosport Dinan Drake Muscle Cars E3 Spark plugs Earl's Edelbrock Edge Products Energy Suspension Equus FAST Fel-Pro Fender Gripper Flowmaster Flowmonster Flowtech Exhaust Frostbite G-Force Grant GT Performance Halibrand HANS Hawk Performance Hays Hedman Hedders Heise Hellwig Hilborn Hi-Lift HK Wheels Holley Holley EFI Holley iNTECH Holley Retrobright Holley Sniper Holley Sniper EFI Hooker Hooker Blackheart Hooker Racingheart Hotchkis Hurst Husky Liners iBEAM Install Bay Jaz Products Lakewood Legendary Wheels Lokar Magnaflow Mallory Ignition Metra Electronics Metra Powersports MGP Caliper Covers Mickey Thompson Molecule Moroso Mr. Gasket MSD MSD Atomic NOS OG Innovations Pertronix Poison Spyder Powermaster ProConnect Proforged ProForm Pypes Quick Fuel Quick Time Racepack RaceQuip Range Technology Raptor Redhorse Performance REKUDO REV Wheels Rocket Racing Wheels Russell Performance Saddle Tramp SCE Gaskets Scorpion Racing Products Scott Drake Shuriken Simpson Smittybilt SPAL Sparco Stilo STS Turbo Sunoco Race Jugs Super Shops Superchips Superwinch Taylor Cable T-Spec TCI Automotive TeraPump Trans Dapt Valvoline Vibrant Performance VP Racing WARN Weiand Westin Automotive Wix Filters XDR Off-Road Yukon Gear Zamp XDR Off-Road Payments Feedback Shipping Returns Payments We gladly accept PayPal and All Major Credit Cards. Sales Tax will be figured at checkout. Feedback Our eBay customer service hours are 8:00 am – 5:00 pm Central Time Monday thru Friday (excluding holidays) If you are not certain about an item or have questions, use the “Ask Seller a Question” link under the listing. We strive to answer questions submitted thru eBay’s message system within 1 business day We want you to be completely satisfied with your purchase – please let us know if you have any problems with your purchase before leaving feedback so we have a chance to make it right – we want your repeat business! Shipping Please see the “Shipping and Payment” tab We ship all US orders via United Parcel Service (UPS Ground) A signature is required on all UPS orders over $750 Tracking information will be sent via email after your package ships (you must supply a valid email address during checkout) We ship within 1 business day upon receipt of payment We do not ship to APO/FPO or US Post Office Box addresses We ship internationally thru United States Postal Service (USPS) Express Mail International; allow extra time for international shipments We can not ship as a "GIFT" or ship anything internationally with changes to the invoice Returns Super Shops Products warrants new Super Shops products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Super Shops Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Super Shops Products. Super Shops Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Buyer pays return shipping About UsFeedbackWarranty Shipping Copyright © 2023 Super Shops. All rights reserved. ebay Template Design by OCDesignsOnline

Price: 479.95 USD

Location: Bowling Green, Kentucky

End Time: 2024-11-24T18:42:38.000Z

Shipping Cost: 0 USD