Duraflex S-10 GMC Jimmy GT Concept Fenders - 2 Piece for Blazer Chevrolet 82-93

Description: About Store Contact Shipping Feedback Duraflex S-10 GMC Jimmy GT Concept Fenders - 2 Piece for Blazer Chevrolet 82-93 ed_104417 Description / Notes: Part #: ed_104417 Make: Chevrolet Model: Blazer Material: FRP Condition: New Product Notes : Duraflex S-10 GMC Jimmy GT Concept Fenders - 2 Piece for Blazer Chevrolet 82-93 ed_104417 Description : 1982-1993 Chevrolet S-10 Blazer GMC Jimmy Duraflex GT Concept Fenders - 2 PieceAll GT Concept parts are designed exclusively by Extreme Dimensions' in-house award winning design team. With over 10 years in the aftermarket industry our team of specialists are always on the cutting edge of automotive trends. Our team studies every angle of the vehicle's appearance to create parts that take your vehicle to the next level. The GT Concept series of parts will keep your vehicle at the forefront of aerodynamic trends.Fits the following models: Fits All Models, Base Model, Xtreme, Z71Hand laid, high quality 6 oz. fiberglassSignature black finishHigh quality weather resistant aluminum mesh grille (where applicable)Proprietary polymer blend for maximum flexibilityIncreased durability and longer service lifeModified AerodynamicsReduced damage rate up to 75%Limited warranty and satisfaction guarantee New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer Duraflex fenders and fender flares are aftermarket accessories designed for track, show, and off-road use only. These components are not intended for use on public roads, and Duraflex disclaims any responsibility for damage, injury, or loss resulting from their use. Due to the nature of fiberglass and the manufacturing process, Duraflex fenders and fender flares are not direct bolt-on parts. They often require significant preparation, such as trimming, cutting, sanding, fitting, or adding fiberglass. Custom bodywork may also be needed, and issues like warping or fitment challenges can arise if not installed properly. Fender Flares Duraflex fender flares extend the wheel arch, providing a more aggressive stance that often complements a full body kit. Depending on the style, some fender flares may need to be attached using rivet nuts with a rubber gasket between the flare and the original fender—neither of which is included. More aggressive flares may also require cutting and rolling the original fender to allow for greater wheel clearance and a lower stance. Adjustments during installation are common due to the nature of fiberglass, and care must be taken to ensure proper alignment and fitment to avoid gaps or uneven surfaces. Fenders Duraflex fenders provide a sleek, customized appearance to vehicles. These lightweight fiberglass replacements often require additional reinforcement around the A-pillar and fender mounting flange for durability and a secure fit. Trimming and reshaping may be necessary to align the fender with the vehicle’s mounting points. Modifications to factory components, such as removing fender liners or adjusting brackets, may also be required for proper installation. For optimal results, Duraflex recommends professional installation by a custom shop experienced in fiberglass work. Traditional auto repair shops may not have the expertise needed for the precise trimming, cutting, or modifying required for fiberglass components. Disclaimer: Duraflex fenders and fender flares are strictly for track, show, and off-road use. They are not street legal and do not comply with Department of Transportation (DOT) regulations. Duraflex does not endorse or recommend using these products on public roads or highways. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. The eBay parts finder may be inaccurate, go by our listing title and description. Verify with us if you are unsure US Customers PayPal is accepted Visa Master Discover also accepted International Customers Please contact us before purchasing Payment types vary Our goal is to earn 5 star rating with every purchase! Tell us how we can make your exerience a 5-star one! All Copyright © Tilbury Enterprises LLC

Price: 393 USD

Location: Fullerton, California

End Time: 2024-12-15T15:18:08.000Z

Shipping Cost: 0 USD