Description: If you have a conventional 100W~500W power amplifier with 8ohm output (low-Z outputs only), and you want 70V or 100V operation, is it possible??YES, the LMT-500 Matching Transformer can convert the "normal" Hi-Fi, ProAudio and PA amplifier into the 70V/100V output system, to setup the distributed line system with transformer mounted speakers, to avoid the eliminates power loss between amplifiers and speakers and also allows longer speaker runs on large indoor installations.By using the LMT-500 with the conventional low-z power amplifier, NO NEED to worry about the Impedance Mismatch. Overheating and Damage, Potential for Short-Circuit or Sound Quality Issues.Application 1 - Works with Stereo Power Amplifier (as 1 source)In this application, you can set up a stereo Public Address System with LMT-500 matching transformer.Note: The input power from each channel of the amplifier should not be higher than LMT-500 Matching Transformer’s rated power to avoid possible damage.Application 2 - Works with 2 Power Amplifier (as 2 source - 2 Zone Distribution)In this application, you can set up a Public Address Distribution System with two different signals and distribute them to different zones.Note: The input power from each amplifier should not be higher than LMT-500 Matching Transformer’s rated power to avoid possible damage.Application 3 - Works with Power Amplifier under Bridged Mode (as 1 source)In this application, you can set up a Public Address System with two channels of LMT-500 bridged to have twice the power of its rated power.Note: The input power from the amplifier should not be higher than twice LMT-500 Matching Transformer’s rated power to avoid possible damage.
Price: 199.9 USD
Location: Ontario, California
End Time: 2024-12-31T21:33:33.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Dynasty ProAudio
Type: Transformer
