Faith Hope Love decal for car window, laptop, journal

Description: Faith Hope LoveDecal is die cut from high quality Oracal 651 vinyl with a minimum outdoor life of 6 years.Decal should stick to any hard smooth surface.Whatever color you choose, will be your decal color. There is no background on these decals. Whatever color of surface you apply it to will be the background color. These decals are not cheap printed stickers, they are single color vinyl decals.There will be application transfer tape pre-installed.Standard decal colors are gloss black and gloss white.Sizes are in maximum inches height and width. Please check the size ahead of time of the area you wish to install on.If a promotion is running, the price will automatically adjust in the cart.Installation notes are below they are online only.Thank you for your business!INSTALLATIONThe recommended temperature to install your decal is between 46 and 90 degrees Fahrenheit.Avoid installing your decal to hot surfaces and not in direct sun light.Oracal 651 is considered a permanent vinyl and should stick to any clean, smooth hard surface. ie: windows,car, metal, notebook, outside of laptop, mail boxDRY METHOD INSTALLATION:tools needed: decal, squeegee or credit card, soap and water or rubbing alcohol or glass cleaner, paper towel, tape measure or masking tape if needed for ease in alignment.Clean area you wish to apply your decal to with soap and water, glass cleaner or rubbing alcohol. Dry area for clean dry application site.Peal application tape from the decal backing up on very slow angle. I recommend as you are pulling the tape backwards to use a credit card over top of tape so decal stays down. If any part of the decal does not transfer to the application tape simply lay tape back down and place on a hard surface and rub the decal with your squeegee or credit card and retry.Once decal is removed from backing carefully place your decal in the desired location. Note: pre-plan ahead on angle and exact placement of decal as there are no adjustments using this method. Once it sticks that will be the permanent location of the decal.After placing decal on you desired surface, rub the transfer tape with your squeegee or credit card to remove any air bubbles.Peel transfer tape back at an angle very slowly to expose your new decal. If any part of the decal lifts up in this process, simply lay transfer paper back down and rug again. Continue to remove until transfer paper is completely removed and your decal is attached to your application surface.You are now finished. Wait about 2 days before washing your vehicle. If placed on an indoor surface hand wash only.

Price: 3.55 USD

Location: Middle River, Maryland

End Time: 2024-02-24T00:33:54.000Z

Shipping Cost: 0 USD