Feed Water Adapter Angle Stop Adapter Valve 3/8 X 3/8 X 1/4 Inch Compression ...

Description: The Water Line Splitter Adapter Tee Valve Use To Tap Into Your Existing 3/8 Inch Shut-Off Valve From Under Sink And Add A Extra 1/4 inch T-Valve Use To Connections Reverse Osmosis ,Refrigerator Fridge Ice Maker, Water Filters,Coffee Brewers,Rodi Systems, Etc. Ro Reverse Osmosis Water Filter Feed Water Adapter Valve Water Line Adapter Water Supply Fitting,Ice Maker Water Line Tee Connector Tee Valve Fitting Splitter Valve Adapter,Can Used On Cold Hot Water Line. This Is A 3/8" Female Compression Port By 3/8" Male Compression And 1/4" Barb.1/4" Port Allows Connection Of Braided Tubing,Copper Tubing,Plastic Tubing.Water Line Adapter No Need To Use Teflon Tape ,The Angle Stop Adapter Valve Has O-Rings For A Leak Free Connection. The Outer Diameter Of The Copper Tubing Or Plastic Tubing Connected To 1/4 Inch Must Be 6.28-6.32MM,Braided Tube Internal Thread Diameter Must Be 9.78-9.82MM 3/8 Inch Male Thread Diameter 14.08MM,3/8 Inch Female Thread Diameter 13.21MM,1/4 Inch Male Thread Diameter 10.96MM. Installation Steps 1.Turn Off The Cold Water Shut-Off Valve. 2.Turn On The Faucet To Release Any Pressure. Disconnect The Existing Faucet Connector Pipe. 3. Make Sure The O-Ring Is Seated Inside The Feed Water Adapter Female End Then Twist It Onto The Cold Water Supply Valve. 4.Twist The Existing Faucet Connector Onto The Male End Of The Feed Water Adapter. 5.Turn Off 1/4 Water Line Splitter Valve, Turn On The Cold Water Supply Valve,And Check For Leaks. 6. Connect The 1/4"Tubing To Water Diverter 1/4" Interface,And Check For Leaks. 7.End Of Installation. 3/8 3/8 1/4 Inch Compression Tee Stop Valve T Adapter Valve For Kitchen Bathroom Under Sink Extra Adding Waterline Connect Refrigerator,Icemaker Ro Reverse Osmosis System Fridge Water Filter Rodi System And Water Fountain Tee Diverter Splittter Valve Connector Adapter Made Of One Piece All Metal Design,Lead-Free Brass Construction And A Chrome-Plated Finish, Sturdy Durable,Tasteless, Non-Toxic,Much Sturdier.Than Cheap Plastic Adapters. All Metal T Tee Valve,Under Sink Water Splitter Water Supply Line Splitter Tee,It Female Housing Can Turn Independently From The Rest Of The Piece,So If House Angle Stop Valves Are Very Close To The Wall, And Again, No Need To Worry About Clearance,Installing The Adapter Is Just As Easy. Under Sink Water Splitter Water Supply Line Splitter Tee,Can Used On A Hot Water Line,And Can Use On A Cold Water Line.Tee Stop Valve 1/4 Inch Compression Fittings Can Be Connected 1/4" Pex Tubing,Ro Tubing ,Braided Tubing,Copper Tubing. The Outer Diameter Of The Copper Tubing Or Plastic Tubing Connected To 1/4 Inch Must Be 6.28-6.32MM,Braided Tube Internal Thread Diameter Must Be 9.78-9.82MM ;3/8 Inch Male Thread Diameter 14.08MM,3/8 Inch Female Thread Diameter 13.21MM,1/4 Inch Male Thread Diameter 10.96MM.

Price: 24.36 USD

Location: Brentwood, New York

End Time: 2024-12-26T18:30:31.000Z

Shipping Cost: 0 USD