Fieldpiece SC680 Wireless Power Clamp Meter

Description: FIELDPIECEJOB LINK SYSTEM600 AC/DC SWIVEL CLAMP METERDUAL DISPLAY/POWER/LPFSC680 SC680 – 600 AC/DC Swivel Clamp Meter Dual Display l Power l LPFPowerful. Capable. Wireless.Wireless direct to Job Link® System for electrical documentationLow Pass Filter for VFD systemsAC/DC clampMolex test leads for small circuitryTest 3-phase with two leadsSafety rated CAT IV – 600V/CAT III – 1000VPower Meter for HVACR with Direct Integration with Job Link® System AppWhether you’re working on small circuitry in mini-splits or on large commercial units, the new SC680 is packed with everything you need to install, service, and troubleshoot any HVACR system.The SC680 is the top of the line digital clamp meter with wireless functionality for the HVACR professional. Send your electrical measurements directly to the Job Link® System mobile app. Leave the meter behind a closed blower door and view the current measurement on your mobile device.Help determine system efficiency by directly measuring power consumption (W) of the system. Use this value to inform your customer of energy saving measures you can take to help them save money on their energy bills.The SC680 is the only meter you’ll need for troubleshooting mini-split systems. Dual Type K temperature ports to measure entering/exiting air temperatures and measure frequency (Hz) directly with clamp jaw. Reach those cramped mini-split connectors with the included RCT2 probe tips for voltage and resistance measurements.Hang your SC680 clamp meter to any metallic surface with the heavy-duty magnet. When the job is done, store your test leads in the back case for tidy and convenient storage. See both voltage and amperage readings at the same time on the large dual display. Easily see your amperage readings no matter how you clamp around a wire with the swivel head AAC clamp.Verify the order of 3-phase voltage lines with just two leads. Capture L1-L2 and L1-L3 to check that motor lines are correctly installed with Phase Rotation test.Take more accurate VAC and AAC readings on variable frequency drives with True RMS sensing technology. Measure the starting amp draw of a compressor with Inrush current mode.Illuminate the way with a powerful LED built into the clamp jaw. Easily see your measurements with the bright blue backlight on the display. Safely change functions with the backlit illuminated dial. Take measurements more safely with one hand using the single test lead holder. Test leads come with removable gold plated tips to reliably connect Fieldpiece accessory heads.Measures Power (kW)Use on variable frequency drives (VFDs)True RMS & Low Pass Filter for VAC/HzTest Diodes and Resistance up to 50MΩAC/DC AmpsDual TempSwivel ClampLead StorageMolex tip leads for small power connectorsIncludes:SC680 Clamp MeterRCT2 Molex Probe TipsADLS2 Silicone LeadsASA2 Gator Clip Leads(2) ATB1 Type K Thermocouples(2) Velcro Straps9V Alkaline BatteryANC7 Protectice Padded CaseOperator’s ManualSpecificationsDisplay: 10000 count dual displayBacklight: 5 minute duration with auto-off, blue colorOverrange: “OL” or “-OL” is displayedMeasurement rate: 3.3 times per second, nominalZero: AutomaticOperating environment: 32°F to 122°F (0°C to 50°C) at <70%RHStorage temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80%RH (with battery removed)Accuracy: Stated accuracy @ 73°F±9°F (23°C±5°C), <75%RHTemperature coefficient: 0.1 x (specified accuracy) per °C [0°C to 19°C (32°F to 66°F), 28°C to 50° C (82°F to 122°F)]APO (Auto Power Off): Approx. 30 minutesPower: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22Battery life: 100 hours typical alkaline (No wireless, no backlight)Low battery indication: Battery icon blinks and “batt” is displayed when the battery voltage drops below the operating levelDimensions: 301.5mm(H) x 79.5mm(W) x 50.0mm(D)Weight: Approx. 480g including batteryAltitude: Up to 6562 ft (2000m)Overload protection: 1000VDC or 750VAC rms unless otherwise statedTest leads: Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or aboveIncluded test leads are gold-plated and have removable safety caps

Price: 403 USD

Location: Rosedale, Maryland

End Time: 2024-11-11T19:33:59.000Z

Shipping Cost: 0 USD