Fits CORVETTE Billet Oil Catch Can Separator with FREE UPGRADE (97-13 Corvette)

Description: 1997-2013 CORVETTE BILLET OIL CATCH CAN SEPARATOR ( UPR Catch Cans include $20 Nickel Fittings for FREE ! ) Part Number: 5032-20 MFG Retail: $ 154.99 Item Finish: Show Quality Satin Finish Fits Models: Corvette - LS1 LS2 LS3 LS6 LS7 Z06 Fits Years: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Items Included: * Our Billet Catch Can inventory is always stocked and ready to ship * Billet catch can (satin)Allen wrenchUPR Angle mounting bracket (satin)3/8 inch Nickel fittings3/8 inch Performance hoseUPR Patented Diffuser Upgrade ( That's a $40 upgrade for FREE ) What is the problem with your PCV system ? The Positive Crankcase Ventilation (PCV) system is used to recycle the gases that leak or “blow-by” the your engines piston rings and create a positive pressure in the crankcase. By venting these gases along with oil mist/vapor from the crankcase and route it back into the intake manifold so it can be burned off. This is a poor fix from automobile manufacturers, because over time the excess oil vapor collects along the inside of the intake tract and forms a “sludge”. This leads to a variety of issues including carbon build up, retarded timing, detonation, power loss and even engine failure. UPR s fix for the PCV system used on many engines for reducing toxic gases from being released into the atmosphere and eliminating positive crankcase pressure / Blow-By. What does a UPR Catch Can do ? UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to. Then the oil forms into droplets and collect in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow by. All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates Positive Crankcase Pressure. UPR s Catch Can has become one of the most widely used and recommended cures for just about every application. The engine size and horsepower level is not relevant to the performance of the UPR Catch Can. UPR s Catch Can has become a cornerstone by improving the Performance and Economy on any vehicle you install it on. Installation Instructions ( See images for installation help ) 1. Remove the factory passenger fuel rail cover. 2. Passenger side front intake you'll see a 11/32 hose from the intake to engine its the crank case to intake, remove that hose. 3. Locate the bolt in the front of the passenger side cylinder head at the top, the only thing this bolt holds up is a ground wire. 4. Remove that bolt (13mm socket) from the head. 5. Connect the two 3/8” lengths of hose to each of the barbed fittings on the catch can. 6. Attach the mounting bracket to the top of the car with the provided allen head bolt. 7. Using the provided bolt mount the catch can to the front of the head with the barbs facing the engine. 8. The round spacer goes between the bracket and cylinder head. Make sure the ground strap stays attached to the head. 9. Connect each 3/8” hose to the port on the intake and valley cover port (see listed pictures). 10. The UPR can does not have an in and out so it doesn't matter which hose is connected to which port 11. Double check your connections, level the catch can and tighten the mounting bolt. 12. Press the fuel rail cover back into place and the installation is complete. NOT FOR SALE/USE IN CALIFORNIA & CARB STATES. ORDERS CANCELLED & REFUNDED Normal 0 false false false EN-US X-NONE X-NONE Item Policies Returns are only accepted within 30 days and only if a Return Merchandise Authorization (RMA) has been issued. All returns MUST be brand new and in their original, unopened packaging. (Item returns may be subject to restocking fees) When shipping the item back to us, be sure to repack the items in an over-box (Original package inside another, larger box) to prevent shipping damage and preserve the original packaging. Original packaging is only meant to protect the products for the one trip shipment to the customer. We are not liable for lost or damaged packages. UPR Products reserves the right to refuse any package returned to us without authorization. Returns/Refunds are processed within (30) business days of receipt (not including holidays, weekends, transit time, or the day the package was delivered.) Special order items, item hardware, rebuild kits. replacement parts, emblems, or decals cannot be returned. If a free shipping item is returned, the original outbound shipping will be deducted from the refund. The customer is also responsible for return shipping. If a customer refuses or is unavailable for an item, they will be charged the return shipping fee by the carrier. If a free shipping item is refused or missed, the outbound shipping will also be deducted from the refund. If a customer changes an address or enters an incorrect address when placing an order, the customer is responsible for any address change/correction fees billed by the carrier and the original outbound shipping fee on all free items. (We do not redirect packages to addresses other than the billing address originally entered.

Price: 129.99 USD

Location: Lake Worth, Florida

End Time: 2024-08-19T18:17:57.000Z

Shipping Cost: 0 USD