fits Kohler Engine REBUILD KIT FOR all K301 030 piston w/gaskets for 12hp Kohler

Description: 12 horse power K301 kohler with 030 piston, rings and gaskets with seals as shown in the pictureThe suffix does not matter. EXAMPLE: K301 is the same as a K301s, K301AQS and so on. If you are buying over size piston the machine shop must have the piston before they can bore the cylinder. If they try and bore your cylinder before they have your new piston, GO to a differant machine shop because they do not know what they are doing. 1. Take block to machine shop so they can measure the cylinder and they will tell you what size to purchase. 2. Order your NEW piston and take it to the machine shop. 3. The machine shop measures the NEW piston and add in the tolerances then bores the cylinder according to the piston size. This is how it is done and you have to make sure it is done this way if yo want it to be correct and last for years and years to come. They have gone on mowers and pulling tractors all over the world! This is for all the K301engines All Parts are HIGH QUALITY PARTS, as PURCHASED THRU STENS/ROTARY KIT INCLUDES THE FOLLOWING: 1- New Piston: ***PISTON COMES IN: 030 in this auction, I do also have std, 010, 020, 030 and 040 in my auctions Piston Rings. Wrist pin and Keepers. Complete Gasket Set. Engine Seals.FREE!! I also give you the torque specs with your purchase (Head 25-30 ft lb and rod 260 inch lb for the 10, 12 and 14 hp engine)The 8 hp is HEAD AT 15-20 FT LBS, rod at 140 inch lb FREE!! instructions on how to properly install your connecting rod.(The oil hole on the rod goes towards the cam) *The most common reason for premature engine failure on your rebuilt engine is an improper rod installation. In my other auctions, I also offer high Quality, cost saving tools and other COMPLETE Engine Rebuild, Refresh Engine Rebuild Kits to rebuild your own engine, so please check out my other auctions for tools, lawn, tractor seats and other rebuild kits. Offer reduced shipping on multiple item purchases. Crank bearings are $49.99 for two -AVAILABLE IN MY STORE Valve guides are $17.50 extra Points plunger or also called points pin is $9.99 (Kohler OEM) Governor gear (kohler OEM) is $42.99 Standard rod or .010 is $25.00.020 connecting rod is $40.00 ( cheaper than a new crank shaft) available in my store and you can add to shopping cart to combine ship. Only have .020 in 10, 12, 14 and 16hpI can only combine shipping before payment is made. Use your shopping cart and when you are done, click on "total requested". I can not add to a bill if the bill has been paid. I can not refund money once seller fees have been paid. Thanks For Looking! ***Copyright infringements now invoke liquidated damages of $1000.00 per instance.

Price: 84.99 USD

Location: Wauseon, Ohio

End Time: 2024-10-19T16:04:55.000Z

Shipping Cost: N/A USD